Marlon C. Pimentel

     Marlon C. Pimentel  Senior Instrument and Control Systems Engineer Tel No: - Email:- SUMMARY OF EXPERIENCE Over 20 years of working experience specializing in electrical, instrumentation and control design and engineering in the Oil and Gas, Petrochemical, Power and Mining Industries. Participated in different phases of the project such as FEED, FEED verification, detailed design and engineering, site supervision and pre-commissioning, for various local and international projects. First eight years of my career, I worked as Electrical and Instrument design engineer, and thereafter focused on Instrument and Control design and engineering. KEY POSITIONS and JOB DESCRIPTION Lead Engineer Attending project meetings with other leads from all disciplines and client counterparts to identify and resolve inter-discipline engineering and design issues Planning instrument and telecom discipline activities Supervise around 30 engineers, designers and drafters Progress reporting Resolve site queries during construction phase Engineering and design man-hour estimate Deputy Lead Engineer Same job description as the lead engineer, except making major decisions which is the responsibility of the lead engineer Engineering Area Lead Supervise a group of instrument and control engineers within the project team, to ensure quality and timely issuance of requisition documents, datasheets and technical bid evaluation Field instrument area lead, supervising a group of engineers responsible for various field instrument, control valve, analyzers and on-off valves packages Control and safety systems area lead, supervising a group of engineers responsible DCS, SIS and F&GS Package Mechanical package area lead, supervising a group of engineers responsible for providing engineering support to mechanical department for various Mechanical Packages, and providing vendor data for incorporation in the Instrumentation team’s deliverables. Responsible for generating key Project documents such as Control Philosophy and Safety Systems Philosophy Checker Checking engineering and design deliverables such as requisition documents, instrument datasheet, bid evaluation tabulation and reports, control and safety system architecture, control narrative, fire and gas cause and effect, instrument location plan, hook-up drawings, wiring diagrams, BOM, loop diagrams, Instrument Index and IO List Responsible Engineer Responsible Engineer (RE) for instrument and control system packages such as for: Integrated Control and Safety Systems, Metering Package, pressure, temperature, flow including multiphase flow meter, and level instruments, on-off actuated and control valves, choke valve, fire and gas devices Generating the Requisition documents, technical bid evaluation, datasheets Vendor data review Inter-discipline coordination Instrument engineering support for Mechanical and Electrical Package Provides engineering inputs to mechanical and electrical packages during requisition, technical bid evaluation and vendor document review stages Mechanical package handled includes Gas Turbine Generator (Solar), Gas Turbine Compressor (Solar, GE), CFB Boiler, Emergency Diesel Generator, Chemical Injection, Fire Water Pump, Centrifugal and submersible pumps, Air Compressor, Nitrogen Generator, Waste Heat Recovery Unit, HVAC, Gas cooler, Produce Water system, and other small packages Instrument and Control Designer Generating drawings such as Control Room and Instrument Equipment Room layout, Control, Safety Systems, Fire and Gas Systems Architecture, Instrument Location Plan, Instrument Wiring Plan, Instrument Air piping plan, Cable Tray routing and section and support details, Hook-up drawings, Installation Details, Wiring Diagram, Loop Drawings, IO List and Instrument Index Electrical Designer Generating drawings such as Electrical Room equipment layout, Power and control cable routing, single line diagram, Lighting Layout, Grounding and Lightning Protection layout Power cable sizing calculation Illumination calculation Other Tasks Performed Engineering support during HAZOP, SIL, P&ID and Model reviews Engineering support during Alarm Rationalization Reviews Review of third reports such as Ergonomic study for Control Room, Fire and Gas Mapping study, and Noise Study Reviews Site work supervision and pre commissioning activities FAT of DCS and Safety Systems EMPLOYMENT HISTORY AND KEY PROJECTS Fluor Daniel Inc. Philippines, Feb 2016 – Present Project: NEXUS Gas Transmission Project, USA Client / Station Operator: Spectra Energy The 250miles Nexus pipeline transports Shale gas from Ohio to Michigan State and comprises of four compressor stations and six metering and regulating stations. I am the Responsible Engineer for the Metering and Regulating (M&R) Package and also provide engineering support for Mechanical packages. Aker Engineering Malaysia Sdn. Bhd, June 2011 – December 2015 The following are brief description of projects I carried out and my roles and responsibilities, in chronological order, starting from the latest. Project: Bassein Development Project (BCP-A3 and BLQ-3) Main Contractor / Fabricator: L&T Hydrocarbon Engineering (LTHE) Client / Operator : Oil and Natural Gas Corporation, Ltd. India Located in Indian sea, this project is an offshore platform comprising of one process platform for additional gas compressor units and utilities and one LQ platform to man the facility operators. In this project, I was assigned as Deputy Lead Engineer and Area Lead for Instrument engineering support for Mechanical Package. I assisted my lead in setting up the engineering and design team. Project: Bergading CPP & WHP EPCIC Project Detailed Engineering Main Contractor / Fabricator: Hyundai Heavy Industries Client / Operator : HESS Exploration & Production Malaysia B.V Located offshore at northern part of Malaysian peninsula, this project consists of a Natural Gas Central Processing Platform, and a bridge-link wellhead platform. In this project, I was assigned as the Deputy Lead Engineer and Area Lead for Process Control and Safety Systems. I was also involved in the FEED verification phase, and project planning for the detailed design phase. I had executed the detailed design phase from kick-off where I helped my lead to set up the team, the engineering and design hardware and software, etc. After issuing all IFC drawings, Aker handed over the remaining engineering to HHI and I was seconded to HHI’s fabrication yard in Ulsan Korea, for follow on engineering support. Project: Kebabangan Northern Hub Project (KBB) Detailed Engineering Client / Operator: Kebabangan Petroleum Operating Company Located offshore in Sabah, Malaysia, KBB project is an Oil and gas platform for processing, wellheads and living quarters. I played multiple roles in different stages of the project. I joined in the mid stage of detailed design, and was assigned as responsible engineering support for Mechanical Packages. Then I replaced the deputy lead engineer who was also the area lead for Mechanical and Electrical packages but eventually resigned from Aker and then tasked to lead after my lead was mobilized to another project. Due to delay in placement of order of most of the Mechanical Packages, and due to some design changes, KBB project was delayed and needed to be re-baselined. I was heavily involved in the re-baseline planning and additional man hour estimate. I stayed in the project along with small team for the fabrication site engineering support. Project: Bunga Kekwa D (BKD) FEED Project Client / Operator: Talisman Energy Inc. Located offshore eastern Malaysia, this FEED project aims to give basic engineering and design concept for the proposed BKD unmanned and remote wellhead platform. I was the RE for Plant Control and Shutdown Systems (PCSS) package. The systems design is to provide unmanned supervisory control of the BKD platform, with facilities to communicate back to the CPP platform thru a digital microwave radio, for monitoring and remote shutdown. Technip Geoproduction Sdn Bhd, June 2008 – June 2011 The following are brief description of projects I carried out and my roles and responsibilities, in chronological order, starting from the latest. Project: Central Diyarbekir Drilling Platform A (CDDP-A) FEED Project Client / End User: Government of Kazhakstan The proposed CDDP-A wellhead drilling platform will be located at the Caspian Sea. In this project, I was tasked as RE for various field instruments Project: Koniambo Nickel Project Client / End User: Government of Kazhakstan Koniambo Nickel project is located in New Caledonia, a French territory located northwest of Australia. It consist of 3 main areas: Metallurgical Plant, Utilities and Material handling and a CFB Coal Power Plant. In this project, I was tasked as an RE responsible to provide instrument and control engineering support for material handling equipment and mechanical packages in the CFB Power Plant such as Boiler Package, Coal Storage Silos and conveyors. Fluor Daniel Inc. Philippines, March 2001 – June 2008 The following are brief description of projects I carried out and my roles and responsibilities, in chronological order, starting from the latest. Project: Saudi Petrochemical Corporation Polypropylene Plant Expansion (SPX) Client / End User: Saudi Petrochemical Corporation SPX is a brown field project that aims to add expand the existing plant with the addition of new equipment and process areas. Started as an area lead for instrument packages, my team was tasked to generate datasheets to be handed over to our home office in Haarlem who then will attach them to requisition and purchase documents. My team were able to complete the datasheets on time and with quality. Eventually I was assigned as the Deputy Lead engineer helping my lead engineer to supervise the team and to coordinate with Haarlem home office for technical matters and schedule Project: Yanbu National Petrochemcical Complex Utilities & Offsite Project. Client / End User: Yansab This project is a brown field petrochemical complex located in Yanbu KSA which comprises of seven petrochemical plants. Fluor was awarded the Project management for the entire project, plus a contract to deliver Utilities and Offsites facilities. I joined the project as an RE for field instruments. Upon learning that I have a FAT experience from my previous company, Fluor re-assigned me as FAT engineer for the Safety Systems (Triconex), which is held in Invensys factory in Bedok Singapore. We have completed FAT of more than 150 safety systems cabinets for the U&O facilities. Electrowatt-Ekono. Philippines, March 2005 – Feb 2006 Electrowatt-Ekono (now called as Poyry) was awarded a Contract for procurement, engineering and construction of Balance of Plant (BOP) facilities for the Circulating Fluidized Bed Boiler project for a new power plant to provide an autonomous power supply for the United Pulp and Paper Plant in Bulacan Philippines. With such a small scope, there was only one engineer per discipline, and few drafters, to provide engineering and design deliverables for the BOP project. As the Instrument and Control design engineer, I was responsible for the instrument packages, drawings and MTO. Has had a short trip to Thailand for the FAT of BOP control logics, which I developed during engineering. After engineering was completed, I was assigned as a site supervisor to oversee construction activities related to instrumentation works and interfaces, not only of the BOP, but also of the Boiler plant, as part of Electrowatt’s contract for the overall EPCM. Hitachi Plant Engineering & Construction Co. Ltd., June 1996 – March 2005 I began my career as young and energetic Electrical and Instrument design engineer with Hitachi Plant Engineering and gradually gained the foundation of design and engineering knowhow, with the help of some Japanese mentors. As a second batch comer, I helped set up Company work procedures, translate design software from Japanese to English, create training manuals, held E&I team and inter-discipline trainings and eventually became mentor to the junior engineers, and finally held a position as Section Head of the Chemical-Electrical Department. I was assigned in various projects which I carried out either in our Makati branch office, Tokyo home office, and regional office in Singapore. I held a position most of the time as E&I designer responsible to generate construction drawings, calculations and MTO. Whenever I was seconded to Singapore branch office, I was assigned to instrument package procurement activities such as generating datasheets, requisition and purchase documents and TBEs. I was also given an opportunity to be a site supervisor, after the design and engineering completion. The following are the list of projects I have successfully executed, in span of almost 9 years, in chronological order starting from the latest. POSCO – 5CGL Project, done in Makati office Toyota – U’z-P1 Project, done in Tokyo office Nisseki – C3 / UD Project, done in Makati Office IMERIS-FUJI, done in Tokyo Office Denka Singapore Pte. Ltd – DSPL III Plant Project, done in Singapore office Showa-Denko Kawasaki AF3 Project, done in Makati office Showa-Denko Kawasaki-SA2 Modification Project, done in Makati office Shin-Etsu-KH Project, done in Japan SembCorp Utilities & Terminals (SUT) Phase D Project, done in Singapore Singapore Land Transport Authority – MRT North East Line Project, done in Singapore Santoku-H2O2 Pre-Treatment Facilities Project, done in Makati Office Purified Tereptalic Acid Project, done in Tokyo office and my first foreign assignment Thailand Cold Rolling Steel Mill Project, done in Makati office as my first project assignment OTHER PERSONAL INFO: Date of Birth: 12 August 1974 Nationality: Filipino Marital Status: Married with 3 sons Professional: Registered Electrical Engineer, Philippine Professional Regulation Commission Associations Education: Bachelor Degree in Electrical Engineering, Mapua Institute of Technology, graduated 1996 Design Software: Smart Plant Instrumentation (INTOOLS), AutoCAD, MS Office Other Interests: Movies, politics Character references: Available upon request