Ryan Clancy
Personal Information
▪
▪
▪
▪
Address: 82 Nassau Street, #66666, New York NY 10038
Date of Birth: May 3rd 1994
Phone Number:-
E-mail:-
Education- M.Eng Masters in Mechanical Engineering, University of Limerick. (1 Year) QCA: 3.1;
Subjects:
1st Semester: Fundamentals of Continuum Mechanics (A2), Non-Linear Finite Element Analysis
(B3), Composite Materials (B1), Advanced Technical Communication for Engineers (B3),
Scientific Computation (C3), Research Project 1 (B1)
2nd Semester: Project Planning and Control (B3), Fracture Mechanics (B1), Boundary Layer
Theory (B2), Research Project 2 (B1)
3rd Semester: Research Project 3 (B- B.Eng Honours in Computer Aided Engineering and Design, University of Limerick. (4
Year) QCA: 3.0;
4th Year Subjects:
1st Semester: Advanced Mechanics of Solids (C2), Computational Fluid Dynamics (C3), Design
for Manufacture (B1), Failure and Damage Analysis (A2) Project 1 (B2)
2nd Semester: Mechanical Design (B3), Engineering Mechanics of Plastics and Composites (C2),
Materials Selection (B1), Project 2 & 3 (B2)
3rd Year Subjects:
1st Semester: Cooperative Education
2nd Semester: Engineering Maths 5 (B2), Heat Transfer (B3), Mechanics of Solids 2 (C2), Finite
Element Analysis (A1), Materials Processing (B1)
2nd Year Subjects:
1st Semester: Engineering Mathematics 3 (B2), Mechanics of Solids 1 (B3), Computer Aided
Design (A1), Thermodynamics 1 (B3), Applied Mechanics (B2)
2nd Semester: Engineering Maths 4 (D1), Materials 1 (B1), Fluid Mechanics 2 (C3), Industrial
Organization (A1), Instrumentation and Control (C3)
1st Year Subjects:
1st Semester: Electrical Engineering (C1), Computing (A1), Chemistry (C2), Introduction to
Engineering 1 (B2), Engineering Mechanics: Statics (C1), Engineering Mathematics 1 (D1)
2nd Semester: Fluid Mechanics 1 (B2), Engineering Mechanics: Dynamics (D1), Introduction to
Engineering 2 (B1), Engineering Mathematics 2 (D1), Production Technology (C3)
Skills Developed:
▪ Developed presentation skills through delivering presentations throughout both my bachelor’s
and master’s degrees
▪ Refined research skills during project work
▪ Established advanced skills on many different platforms of CAD through numerous college
projects
▪ Project work done in Design and Communication Graphics in secondary school on a new
design developed my design skills and experience on SolidWorks®
▪ From both a module undertaken during my first year of my bachelor’s and master’s degrees I
have gained experience on Matlab and Python programs
▪ A CAD project completed in second year of my bachelor’s degree has given me good
experience on PTC Creo Parametric. I also completed my Final Year Project on Creo 3.0
▪ Through the Finite Element Analysis modules in my 3rd year of my bachelors and master’s I
have gained a lot of experience on Abaqus
▪ During the CFD module I undertook during my bachelor’s degree I used the program
STARCCM+ to complete the coursework
▪ Finally, the programming needed to complete my master’s thesis was done on Motion Perfect
v4, using the programming language TrioBASIC
Work Experience
Mechanical Engineering HQ, New York, NY 11412
June 7th 2019 – Present
Founder
▪ Founded Mechanical Engineering HQ in June 2019
▪ Created the website for Mechanical Engineering HQ
▪ Performed keyword research to determine target audience and valuable keywords,
▪ Authored 2-3 engineering blog posts per week since December 2019 - Present
▪ Wrote multiple guest posts on other engineering sites, including Engineering360, Bricsys,
NewEngineer.com and more
▪ Created a 30,000-word Autodesk AutoCAD manual for our newsletter sign-up bonus
▪ Managed the website and performed all administrative tasks
▪ Work as an engineering freelance writer for Engineering Clicks, Clinked, Engineering360 and
other websites producing technical engineering content from August 2020 – Present
▪ Created a 19-part video CAD course for Bricsys’ new online learning center
▪ Have worked on multiple 2,000-word white papers for publication
▪ Conferred with company presidents to establish technical specifications and determine subject
material to be developed for publication
▪
Currently working on 3 eBooks to be published in January 2022
Engineering Solutions, 150 West 30th Street, New York, NY 10001 March 16th 2020 – July 30th 2021
Engineer
▪ Engineering and design from conceptual mark-ups to ACAD production
▪ Perform site surveys, inspections and construction punch lists
▪ Review shop drawings and submissions
▪ Enhance drawing and specification standards
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
Communicate with staff, clients, contractors and vendors
Attend meetings to ascertain project demands and requirements
Perform project management manpower assessments
Review overall project designs for coordination and quality control
Optimize office operations to improve efficiency and quality
Training in all MEPFP trades, including design, standards and production
Perform DOB special inspections
Study and analyse codes and standards
Develop client relations, assist in marketing and business development, and attend networking
events
Review of RFPs and prepare project proposals
LTB Mechanical Corp., 446 East 134th Street, Bronx, NY 10454 October 2nd 2017 – March 15th 2020
Engineering Manager
▪ In charge of in-house Mechanical Engineering design services which allowed the company to
offer turnkey services. Note: My designs were peer reviewed for accuracy, value and NYC
Building Code compliancy by a licensed professional engineer
▪ Performing project and individual space heating and cooling load calculations, based on
psychrometric principals and project-specific characteristics (i.e. building construction
insulation values, glazing performances, space occupancies and configurations/orientations)
▪ Performing space airflow calculations, and properly size ductwork mains and branches as
required, to deliver required space conditioning
▪ Selecting equipment/systems to achieve desired indoor environmental conditions
▪ Calculating outdoor air intake requirements to satisfy indoor occupancy ventilation
requirements
▪ Prepare scaled systems layouts in electronic format using Autodesk® AutoCAD, for
contractor's use during project construction
▪ Expanded my project equipment and materials take-off services to performing full project cost
estimating and proposal preparation services
▪ Managed $10+ million worth of high-end residential HVAC construction projects
▪ Created the HVAC shop drawings on all high-end residential construction projects undertaken
by the company; these were created on AutoCAD
▪ Attending project site construction/coordination meetings with various project managers,
general contractors, engineers and architects
▪ Prepared Power Supply and Controls diagrams (Wiring Schematics) on AutoCAD for
technicians to use while on site
▪ Reviewing project air and water balancing reports to confirm compliance with approved
construction documents
▪ Preparing equipment cut sheet submittals for design applicant approvals
▪ Created detail drawings of any condensers/air handlers being hung in residential apartments
and of all/any other situations that required a detail
▪ Was solely responsible for the running of a new in-house fabrication shop for the fabrication
and distribution of HVAC ductwork. This involved preparing manufacturing drawings for
various pieces for projects prior to submission to the workshop, and dealing with customers
directly
▪
▪
▪
Converted the technicians notes per service visit into dispatch reports using the dispatching
software ESC (Electronic Service Control) which were then sent out to the customers
These reports were converted into invoices making sure to include all time & materials and
sent out to the customer through QuickBooks™
Managed the accounts receivable for a short time while a replacement bookkeeper was found
Foynes Engineering Ltd., The Harbour, Foynes, Co. Limerick
3rd June 2014 - 23rd January 2015
Project Engineer
▪ Provided project equipment and materials take-off services for potential company projects
▪ Had sole responsibility for the manufacture of and delivery of steel structures to site
▪ Created 3D models on PTC Creo Parametric for Company Projects to specific dimensions
▪ Ordering and tracking of equipment and materials deliveries
▪ Tendered for insulation of projects
▪ Designed plans for new offices on Autodesk® AutoCAD
▪ Constructed plans of projects on AutoCAD to determine what quantity of a certain material
was needed
▪ Organised the company’s tenders into chronological order and recorded them
▪ Checked purchase orders coming in and linked them with quotes, preparing them to be
invoiced
▪ Linked the supplier to our workshop, working with the Fabrication Manager on the creation
of pieces/structures for ongoing jobs
▪ Experienced the full engineering process from tender to manufacture on site, and then to
payment
Other Skills
▪
▪
▪
▪
Communication Skills: Giving presentations and speaking confidently on the phone to clients
and quoting projects
Report/presentation/technical writing to deadlines
Operates well as a leader and a member of a team with duties like project work
Extreme attention to detail and organisation
I would like to take this opportunity to thank you for reading my resume.
Signed:
______________________________
Ryan Clancy
