GARALA BRIJESH MANUBHAI
701-sheffire Tower
Sun-city Apartment
Sadhu Vasvani Road, University Road
Rajkot 360005, Gujarat, India
Date of Birth : June 21, 1979
Mobile: - / -
Email:--
Experience – 15 Years
Om Institute of Engineering & Technology, Junagadh
April 2017 – till date
Designation:
Principal & Centre in charge of Om Centre for Research & Innovation
Job profile:
Overall College Management, Skill Development Centre management, coordination with NSDC &
CED for skill development project, Management of 1st Business accelerator & start cell at college,
Research projects patenting, Industry Consultancy, New product Development, Research Projects
Funding, Dealing with various incubators for students startups, Patenting of projects, organizing
various events and workshops for benefit of students.
Om engineering college, Junagadh
July 2013 – March 2017
Designation:
Associate Professor and Head of Mechanical engineering department
Job profile:
Teaching undergraduate students, management of mechanical department, Skill development of
students according to industry requirements, Project Guidance, Research projects patenting, Industry
Consultancy, New product Development, Research Projects Funding, Overall Management, Dealing
with government for students startups, Patenting of projects, organizing various events and
workshops for benefit of students.
Industrial Automation Services, Rajkot
February 2012 - June 2013
Designation: Director Technical
Job Profile:
Industrial automation services mainly deal with new development of special purpose machines. My role
is to develop machine as per customer requirements according to customer needs, develop finalize the
design of machine, development of components from vendor as per requirement, procurement of
materials, planning of machine development etc.
Some of clients are as below
Comet Tools Pvt. Ltd.
Shreenathji Technocast Pvt. Ltd.
KSP Auto & Forge Pvt. Ltd.
DCM Bearings Pvt. Ltd.
Narmada Rings Pvt. Ltd.
Many more …........
Faculty of Engineering Marwadi Foundation Group of Institution, Rajkot.
June 2010 – January 2012
Designation: Asst. Professor
Job profile: Teaching undergraduate students
Arihant Industries Rajkot
August 2002 – May 2010
Designation: Production Manager
Job Profile:
Arihant industries had machining facility and machine various types of gears blanks, shafts, clutch plate hubs
and many more automobile components approximately 125 Ton/month. My role is to make proper planning of
each component (PPC), conform quality(QC) of all components make reports and charts for them, reduce
production time, new development of parts and jig and fixtures for part (NPD), develop vendors for specific
work etc.
Some of Clients are as below
Mahindra Gears & Transmissions Pvt. Ltd.
Setco Clutch Ltd.
Power Build Ltd. (Group of Elecon Engineering companies)
Comet Tools Pvt. Ltd.
Kalaria Forge Pvt. Ltd.
Kadvani Forge Ltd.
Amul Industries Ltd.
Many more ….........
Educational Qualifications
Sr.
No.
Degree
Class
Percentage
Year of
Passing
Name of College & University / Board
1
SSC
1st Dist
79.57
1995
Gujarat Board
2
HSC
1st Dist
75.38
1997
Gujarat Board
3
4
5
B.E
M.E.
Ph.D.
1st
6.81 CPI
1st Dist
68.75
Pursuing from June
submitted for review.
2001
B.V. M. Engg college, S P Uni
2003
L. D. Engg. College, Gujarat Uni
2014 Thesis Rai University Ahmadabad
Research work done as student for U.G./ Master/Doctorate Degree
Degree
Period
Topic
From
B.E.
M.E.
Computer Aided Tolerance
Charting
Solid modeling design and
analysis of 500 MW nuclear
power plant
Jan-2001
July 2002
Institution/
University
To
June -2001 BVM Engg College
S.P. University
L.D. College of
engineering
Jan -2003
Gujarat University
Name of
Guide
Prof. Vinay
Patel
Prof. V. R.
Iyer
Projects guiding thesis of UG/PG Students
Sr no
1
2
3
Period
Jun 2009
Jun 2010
Jun 2011
May 2010
May 2011
May 2012
Degree
B.E
B.E
B.E
No of students guided
5 ( R K University Rajkot)
4 (Indus University Ahmadabad)
3 ( V V P Engineering college Rajkot)
4
Jun 2012
May 2013
B.E
5
6
7
8
Jun 2013
Jun 2014
Jun 2012
Jun 2013
May 2014
Continue
May 2013
May 2014
B.E
B.E
M.E
M.E
9 ( V V P Engineering college Rajkot),
6 (R K University Rajkot)
4 (Indus University Ahmadabad)
22 ( Om Engineering college Junagadh)
2 ( B H Gardi Engineering college Rajkot)
5 ( Atmiya engineering college Rajkot)
Funded Research Projects
Department of Science & Technology approved project "WATER & ELECTRICITY GENERATION
THROUGH RENEWABLE ENERGY" at iCREATE centre ahmedabad under NIDHI PRAYAS SCHEME
Funded Industrial Projects Completed
Sr Description of Projects
1 Development of automatic multi spindle special purpose machine to
increase productivity
2 To mix various types of powders automatically by considering weight
percentages
3 Develop automatic system for loading & unloading of components for
CNC turning centers for various cnc machines
4 Design and automation of threading on plastic pipe from ½ “ to 4” dia
5 Development of special purpose face grooving machine
Customer Name
KSP Auto pvt ltd Rajkot
Kamani Plastics pvt ltd
Bhavnagar
General purpose
IDOL plasto pvt ltd. Rajkot
Shreenathji techno cast pvt ltd
Rajkot
Shiv products Rajkot
Development of fully automatic still pipe (3.5” to 8” dia) cutting
machine
Development of retro fitting lathe machine using controller and software General Purpose
for various industries
6
Funded Industrial Consultancy Completed
Sr Description of Projects
1 Development of Process sheet for casting
housing used
2 Designing of Jig & Fixture
3 Development of Special graded Aluminum
material of impeller
Customer Name
Sumangal castings pvt ltd
Sumangal castings pvt ltd
Vishal submersible pumps pvt ltd.
Training programs after graduation / post-graduation
Name of program
Period
details of place/institutions
Metallurgical aspects of tribology
30/11/09
4/12/2009
SVNIT surat
Advances in mechanical engineering
6/6/2011
8/6/2011
SVNIT surat
Mission 10X by ISTE and Wipro
27/6/11
1/7/2011
Marwadi college rajkot
AutoCAD 2011 certified associate
28/7/11
28/7/11
B H Gardi engineering college Rajkot
Importance of CAD/CAM
18/11/13
22/11/13
Date
Organization
Place / Institutions
5 International Leadership Excellence
Summit
-
Gujarat Technological
University (GTU)
GTU Gandhinagar
QS Seminar on Rankings, Ratings &
External Strategies
-
GTU & Ganpat University La Meredian Hotel
Ahmedabad
Software Awareness Seminar on
instrumentation
-
National Instruments
L D College of engineering
Seminars Attended
Name of Seminar
th
Hotel Fernn Ahmedabad
Paper presented in conferences / seminars etc.
1
2
“Determine the relation between deflection occurred due to axial force and radial force with total
deflection” presented at International Conference on Innovative Science & Engineering Technology
organized by V V P Engineering college Rajkot during 8th & 9th April ,2011
“An analytical approach to design, analysis and optimization of headstock for VMC” published at
International journal computer applications in engineering, technology and sciences (IJ-CA-ETS)
ISSN :-
“Optimization of machining cost and development of control plan by proper selection of machining
process” Presented at International Conference- 5th International Conference on Advances in
Mechanical Engineering (ICAME-2011), SVNIT Surat during 6th – 8th June 2011
3
4
“Optimization of machining cost and development of control plan by proper selection of machining
process” published at International Journal of Manufacturing Technology and Industrial Engineering
(IJMTIE) ISSN-
5
“Mathematical Modeling & Optimization of Robot Manipulator System using Inverse Kinematics”
presented at 2nd National Conference ENACT-2011 at Sathyabhama University during 14th-15th
September 2011
6
“Design of hydraulic power pack for SPM ( Multi spindle drilling )” published at Indian journal of
applied research (IJAR) June 2013 issue. ISSN-X impact factor 2.1652
"Design of feed drive system of special purpose CNC turning machine" published at Journal of
Mechanical and Production Engineering Research and Development ;ISSN (Print):-;EISSN:-;Impact Factor(JCC): 5.2189
7
"Review of selection of mechanism of food packaging" published at International journal for research
in technological studies;ISSN (online):-;E-ISSN:-
8
“Review of wear mechanism of Aluminum Silicon composite material” presented at International
Conference on Contemporary Issues in Engineering & Technology (ICCIET-2014) held from 19-21
March 2014 in Mehsana, Gujarat, India organized by Merchant Engineering College – Basna and
Sardar Patel Institute of Technology – Piludara at Merchant Education Campus Run by Shri Merchant
Charitable Trust
9
10
11
12
13
POWER GENERATION WITH MINI WIND MILL AND SOLAR PANEL “A FUTURE ENERGY
SOLUTION FOR DOMESTIC POWER REQUIREMENT” published at Journal of Mechanical & Civil
Engineering (IJDRO) VOL 2 ISSUE 5 MAY 2015 Paper 21, ISSN- impact factor 2.07
“A Research Paper on Design and Analysis of Fixture for The Pump Casing” published at
International Journal of Futuristic Trends in Engineering and Technology (IJFTET): ISSN :- Vol-I ,Issue-IV , May-2014
“Experimental setup to increase the efficiency of solar panel by using the water circulation” published at
Global Journal for Research Analysis : ISSN :- Vol-IV ,Issue-VIII , August 2015 Impact
Factor 3.1218
“2-D Mathematical Modeling for Two Link Robot Manipulator System” published and presented during
1st international conference on automation in industries (ICAI-2016) at Om Engineering College
Junagadh During 5-6 April 2016
Computer proficiency
Pro E / Creo
Solid works
MATLAB – 9
Auto CAD
Siemens 802-D ( CNC Lathe programming)
Subjects taken
Engineering Drawing
Manufacturing process
Material Science & Metallurgy
Mechanical Measurement & Metrology
Kinematics of machine
Non conventional energy sources
Computer Aided Manufacturing
Machine Design
Computer Aided Design
Theory of machine
Key skills
Design & Optimization of Mechanical components considering all manufacturing aspects
Team management and communication skills
Machining aspects and jig fixture designing for higher productivity
Metallurgical aspects for different materials
Robotics & Automation
Finite Element Analysis, both static and dynamic analysis.
Costing and optimization of process & process parameters
Achievements
Get excellent faculty award by ARK techno solutions and HELIOS IIT Bombay for giving contribution in
providing robotics educational awareness at zonal level
Life time membership of space society of mechanical engineers -SAC-ISRO
Chair person to organize one day work shop on Rapid prototyping techniques jointly organized by om
engineering college and space society of mechanical engineers (SSME- SAC-ISRO)
Main in charge of mechanical exhibition MANIFEST 14 (3 days technical exhibition)
Organizer ------ number of national level seminars and FDP at college
Convener to organize 3 day national seminar on Entrepreneurship awareness camp jointly organized by
om engineering college and CED ( Center for entrepreneurship development – A Government of Gujarat
organization)
Chair person to organize one day work shop on Applications of non contact measurement techniques in
space engineering jointly organized by om engineering college and space society of mechanical engineers
(SSME- SAC-ISRO)
Conducting GTU interview as a subject expert for assistant professor in mechanical engineering.
Organizing mega placement drives at college campus with more than 30 industries and 500 degree,
diploma mechanical engineering students
Conducting carrier guidance counseling seminars for 12th science students with their parents and final year
degree engineering students at various places
Editorial Board member in many reputed national/international journals
Chairman of 1st International Conference on Automation in Industries organized by Om Engineering
College & Space Society of Mechanical Engineers (SSME-ISRO) sponsored by Institution of EngineersIndia (IEI), Gujarat council on science & technology (GUJCOST), World Federation for Engineering
Organization (WFEO) and many other industries dated 5-6 April 2016
Project Leader to develop 1st Business startup & accelerator Cell in Gujarat in association with The Centre
for Entrepreneurship Development (CED Govt. of Gujarat Gandhinagar)
Project Leader to establish Skill Up-gradation Centre and received grant of (1,00,00,000) One Crore Rs
form The Centre for Entrepreneurship Development (CED Govt. of Gujarat Gandhinagar)
Organizing Chair person for conducting 3 day workshop on Entrepreneurship Awareness Camp in
association with The Centre for Entrepreneurship Development (CED Govt. of Gujarat Gandhinagar)
Organizing Chair Person for conducting 2 days Boot Camp on Idea Generation and Execution in
association with Pandit Din Dayal Petroleum University (PDPU)
One project (VAWT) selected by Department of Science and Technology (DST) under NIDHI PRAYAS
SCHEME at ICREATE centre dholera.
Filed provisional patent for Vertical Axis Wind Turbine (VAWT)
Personal details
Languages known
Sex
Marital status
Passport No
Issue Date
Expiry Date
Hobbies
Sports
Nature
Subject of interest
:
:
:
:
:
:
:
:
:
:
English, Hindi, and Gujarati
Male
Married
K-
Teaching, Technical discussion, Reading, Movies, driving
Football, volleyball, badminton
Down to earth, can mix with others, ambitious
Research & Development, optimization
References:
Shri A C Mathur
Dr. Chandan Chettrjee
Mr Jayant Jamuar
Mr. Vijaysinh Zala
Prof. V R Iyer
Prof. D K Basa
Group Director, SAC-ISRO Ahmadabad
Director, The Center for Entrepreneurship Development (CED), Gandhinagar
Precedent, ASM International-India
Head, Jyoti CNC Automation Ltd. Rajkot
Director, Center for Continue Education (CCE), Nirma University
Head Metallurgy department Indus University