Angelo Uy

ANGELO R. UY Blk 18 Lot 3 Carmona Estates Phase 6 Bgy. Lantic, Carmona, Cavite, 4116 Cellphone Number:- E-mail Address:- PROFESSIONAL WORK EXPERIENCE ⦁ Senior Process Engineer – Laser Mark & Metal Finishing Station June 2011 – Present ON Semiconductor Governor’s Drive, Bo. Maduya Carmona, Cavite, Philippines 4116 ⦁ ⦁ ⦁ ⦁ ⦁ ⦁ ⦁ ⦁ ⦁ ⦁ ⦁ Supervises Engineering operations for Metal Finishing. Supervises Engineering operations for Laser Mark. Reports directly to the Section Manager. Attends to important issues regarding quality, improvement plans, customer inquiries, and productivity improvements. Generates improvement actions beneficial to yield and quality. Works hand in hand with the maintenance group to improve equipment performance that would result to better yield, quality, and machine productivity Performs gap analysis on goals which are not met to determine course of actions on how to achieve management set goals. Generates technical specifications and documents that would serve as guide to production personnel for the proper implementation of every instruction. Responsible in generating Assembly Process Flows on incoming new devices. Responsible in the creation of customer logos for special customer marking requirements. Responsible in revising Assembly Process Flows based on recent requirements or changes in the Bill of Materials. 1 ⦁ ⦁ ⦁ ⦁ ⦁ ⦁ ⦁ Supervises Engineering Build Requests (EBR) to ensure proper and smooth transition of lot/s at Laser Mark and Metal Finishing stations. Handles a group of Engineering Technical Operators (ETO) and Process Technicians who performs the duties of executing the defined process controls at Metal Finishing. Spearheads DMAIC and Six-Sigma projects to resolve chronic assembly problems. Responsible in coordinating with counterparts abroad in the standardization of marking documents of ex-AMIS & ex-Catalyst devices. Responsible in handling the Solderability Test area after it was transferred from Reliability to Manufacturing in order to expedite results which, is one way of further enhancing the cycle time of lots. Currently spearheading the implementation of IR Reflow Testing on all Tin Plated devices in the Assembly line. Currently identified as the Marking representative of OSPI-Carmona in the transfer of the marking requirements of OSPI-Cebu (formerly Fairchild) to the ONSEMI standard marking format. KEY ACCOMPLISHMENTS: ⦁ Certified as a Yellow Belt Six-Sigma practitioner. ⦁ Completed a Six-Sigma project which eliminates the manual selection of leadframe filenames of SOIC 8 which have several leadframe configuration at HANS Laser Marking machine. ⦁ Certified as Green Belt Six-Sigma practitioner. ⦁ Identified as the Marking champion to represent ON Semiconductor Carmona in the Product Data Management (PDM) meeting held at Phoenix, Arizona last March 2014. ⦁ The meeting resulted in the implementation of reflecting marking diagrams of devices with special marking on the MBOI (Materials Bill of Instruction) and eventually in the Shop Order or Lot Traveller Card. ⦁ Senior Process Engineer – Laser Mark & Trim & Form Station October 2010 – June 2011 ON Semiconductor Governor’s Drive, Bo. Maduya Carmona, Cavite, Philippines 4116 ⦁ ⦁ ⦁ ⦁ ⦁ Supervises Engineering operations for Trim & Form. Supervises Engineering operations for Laser Mark. Reports directly to the Section Manager. Attends to important issues regarding quality, improvement plans, customer inquiries, and productivity improvements. Generates improvement actions beneficial to yield and quality. 2 ⦁ ⦁ ⦁ ⦁ ⦁ ⦁ ⦁ ⦁ Works hand in hand with the maintenance group to improve equipment performance that would result to better yield, quality, and machine productivity Performs gap analysis on goals which are not met to determine course of actions on how to achieve management set goals. Generates technical specifications and documents that would serve as guide to production personnel for the proper implementation of every instruction. Responsible in generating Assembly Process Flows on incoming new devices. Responsible in revising Assembly Process Flows based on recent requirements or changes in the Bill of Materials. Supervises Engineering Build Requests (EBR) to ensure proper and smooth transition of lot/s at Laser Mark and Trim & Form stations. Handles the Scanning Acoustic Microscopy (SAM) station since in-process monitoring frequency is required. Handles a group of Engineering Technical Operators (ETO) who performs the duties of executing the in-process SAM test monitoring. KEY ACCOMPLISHMENTS: ⦁ Selected as one of the candidates for the Six-Sigma Yellow Belt training. ⦁ Completed a Six-Sigma project which eliminates the manual selection of leadframe filenames of SOIC 8 which have several leadframe configuration at HANS Laser Marking machine. ⦁ Process Engineer – Laser Mark & Trim & Form Station September 3, 2007 – October 2010 ON Semiconductor Governor’s Drive, Bo. Maduya Carmona, Cavite, Philippines 4116 ⦁ ⦁ ⦁ ⦁ ⦁ ⦁ ⦁ ⦁ ⦁ Supervises Engineering operations for Trim & Form. Supervises Engineering operations for Laser Mark. Reports directly to the Section Manager. Attends to important issues regarding quality, improvement plans, customer inquiries, and productivity improvements. Generates improvement actions beneficial to yield and quality. Works hand in hand with the maintenance group to improve equipment performance that would result to better yield, quality, and machine productivity Performs gap analysis on goals which are not met to determine course of actions on how to achieve management set goals. Generates technical specifications and documents that would serve as guide to production personnel for the proper implementation of every instruction. Responsible in generating Assembly Process Flows on incoming new 3 ⦁ ⦁ ⦁ ⦁ ⦁ ⦁ devices. Responsible in revising Assembly Process Flows based on recent requirements or changes in the Bill of Materials. Supervises Engineering Build Requests (EBR) to ensure proper and smooth transition of lot/s at Laser Mark and Trim & Form stations. Handles the Scanning Acoustic Microscopy (SAM) station since in-process monitoring frequency is required. Handles a group of Engineering Technical Operators (ETO) who performs the duties of executing the in-process SAM test monitoring. Responsible to create special customer logos at Laser Mark. Played a major role in the in-sourcing activity at Laser Mark during the merging of the company bought by ON Semiconductor. KEY ACCOMPLISHMENTS: ⦁ Awarded as the Best Paper for the End-of-Line Track entitled: “Package Crack Resolution through Low Stress Dambar Punch Design: A Six Sigma DMAIC Approach on the recently concluded 20th ASEMEP National Technical Symposium held at the SMX Convention Center, Mall of Asia. ⦁ Eliminated the recurring Package Crack problem at Trim & Form Station. ⦁ 100% Automarking of devices which are previously being manually marked at Laser Mark station. ⦁ Process Engineering Section Manager (End-of-Line) March 26, 2004 – August 31, 2007 Orient Semiconductors Electronics Philippines Light Industry and Science Park 2, Calamba, Laguna ⦁ ⦁ ⦁ ⦁ ⦁ ⦁ ⦁ ⦁ ⦁ ⦁ ⦁ ⦁ Handles a group of engineers for End-of-Line Stations. Supervises Engineering operations from DTFS to Packing at End-of-Line. Reports directly to the Technical Director. Attends high level management meetings. Attends to important issues regarding quality, improvement plans, customer inquiries, and productivity improvements. Generates improvement actions beneficial to yield and quality. Presents group accomplishments during quarterly management review. Works hand in hand with the maintenance group to improve equipment performance that would result to better yield, quality, and machine productivity Performs gap analysis on goals which are not met to determine course of actions on how to achieve management set goals. Generates technical specifications and documents that would serve as guide to production personnel for the proper implementation of every instruction. Responsible in downloading / cascading important management information to subordinates. Enhances the technical skills of the engineers by guiding them on the proper 4 ⦁ ⦁ End-of-Line Senior Process Engineering Supervisor February 1, 2001 – March 25, 2004 Orient Semiconductors Electronics Philippines Light Industry and Science Park 2, Calamba, Laguna ⦁ ⦁ ⦁ ⦁ ⦁ ⦁ ⦁ ⦁ ⦁ ⦁ ⦁ ⦁ ⦁ ⦁ execution of Problem Solving Methodology (PSM) for the detailed resolution and prevention of a problem. Attends regular customer meetings to present the company’s performance and to present on how to enhance further the company indices. Supervises Engineering operations from Marking up to Packing. Reports directly to the Technical Director. Attends to important issues regarding quality, improvement plans, customer inquiries, and productivity improvements. Generates improvement actions beneficial to yield and quality. Generates presentation for monthly or bi-monthly customer review. Attends to all customer line audits to assist the customer and to answer every inquiry on the existing procedures and standards of the company. Works hand in hand with the maintenance group to improve equipment performance that would result to better yield, quality, and machine productivity. Generates technical specifications and documents that would serve as guide to production personnel for the proper implementation of every instruction. Conducts customer site visit in the event of any issues concerning yield and quality and / or new business opportunities. Initiates company communication to vendor with regards to urgent machine servicing and improvement. Ensures that the processing of all customer qualification lots are properly endorsed and / or supervised on all stations. Supervises equipment qualification and set-up and ensures that the equipment is on its optimum performance prior endorsement for production use. Supports the Tape & Reel group at Final Test regarding dispositions on products which encounters problems. End-of-Line Process Engineering Supervisor February 1, 2000 – January 31, 2001 Orient Semiconductors Electronics Philippines Light Industry and Science Park 2, Calamba, Laguna ⦁ ⦁ ⦁ ⦁ Handles Mark / DTFS / Lead Scan / FVI / Packing Stations. Reports directly to the Department Manager. Attends to important issues regarding quality, improvement plans, customer inquiries, and productivity improvements. Attends to customer, yield, and quality issues, which requires 8D reports. 5 ⦁ ⦁ ⦁ ⦁ ⦁ ⦁ ⦁ End-of-Line Process Engineer October 20, 1998 – January 31, 2001 Orient Semiconductors Electronics Philippines Light Industry and Science Park 2, Calamba, Laguna ⦁ ⦁ ⦁ ⦁ ⦁ ⦁ ⦁ ⦁ ⦁ ⦁ ⦁ Works hand in hand with the maintenance group to improve equipment performance that would result to better yield, quality, and machine productivity. Generates technical specifications for the purchase of new equipments. Attends to all customer line audits to assist the customer and to answer to every inquiry on the existing procedures and standards of the company. Performs equipment buy-off and set-up and is the one responsible in releasing the qualification report prior endorsement for production use. Responsible in setting up the networking method for Laser Marking to eliminate manual data input which would result to administrative related problems. Supports the Tape & Reel group at Final Test regarding dispositions on products which encounters problems. Assigned primarily at Back-end station (Pad Print/Laser Mark/Lead Scan/FVI/Packing). Part of the start-up team. Generates specifications and operating procedures that would serve as guide to all production personnel. Performs equipment buy-off in and out of the country. Performs equipment set-up and parameter optimization. Performs evaluation that would be beneficial to the company come mass production. Initiates direct contact with the vendors regarding materials to be used for production. Initiates material changes that would contribute to the cost reduction program of the company. Gives special attention to line issues concerning yield and quality. Supports the Tape & Reel group at Final Test regarding dispositions on products which encounters problems. Cadet Engineer to Process Engineer July 15, 1996 – October 15, 1998 Amkor/Anam Pilipinas, Inc. – P1 Km 22 South Superhighway, Muntinlupa City, Metro Manila ⦁ ⦁ Performs equipment set-up and trouble shooting. Generates yield reports to be given to the Managers. 6 ⦁ ⦁ ⦁ ⦁ ⦁ Generates important instructions to be used inside the production line to support the existing specifications. Performs correlation study using a golden unit to be used for the qualification of a particular equipment. Deals with line and customer issues. Generates permanent corrective actions for a particular line issue. Generates improvement plans that would be beneficial to both yield and quality. TRAININGS / BUY-OFF / SEMINARS ATTENDED ⦁ ⦁ ⦁ ⦁ ⦁ ⦁ ⦁ ⦁ ⦁ ⦁ ⦁ ⦁ ⦁ ⦁ ⦁ ⦁ ⦁ ⦁ ⦁ ⦁ ⦁ MicroVision 851 Mark/Lead Scanner Equipment Training. MARKEM 612 Plate Maker Training. MARKEM 535 Pad Print Equipment Training E&R Mark Handler Equipment Training EO TECHNICS Laser Marking System Training CONTREL Lead Scanner / Open-Short Equipment Training TI Lead Inspection System Certification Training Basic SPC Training Global 8D Training QC Story Basic Pneumatics Training Failure Mode and Effect Analysis (FMEA) Training 5S Training POKA YOKE (Fool Proofing) Training Bin Cheng Technology (BCT) Tooling and System Training General Scanning (GSI) Laser Marking System Training Green Mold Compound Seminar Lead Free Solder Plating Seminar Basic Supervisory Training Member of the Buy-off Team sent to Kaohsiung, Taiwan for the qualification of the BCT DTFS equipment (November 2, 1998 to November 4, 1998 and December 15, 1998 to December 21, 1998) Member of the buy-off team sent to Shenzhen, China for the qualification of the CORBEST Mold Tool. EQUIPMENTS HANDLED ⦁ ⦁ ⦁ ⦁ ⦁ Texas Instruments (TI) AT-4070 Lead Inspection System for QFP MicroVision Model 851 Mark/Lead Scanner for SOIC, SSOP, and TSSOP MARKEM 535 Pad Printing System General Scanning (GSI) Laser Marking System EO TECHNICS Laser Marking System (Diode and Lamp Pumped Systems) 7 ⦁ ⦁ ⦁ ⦁ ⦁ ⦁ ⦁ ⦁ ⦁ ⦁ ⦁ ⦁ ⦁ ⦁ ⦁ ⦁ ⦁ E&R Pad Print and Laser Marking Handler System MARKEM 612 Plate Maker Contrel / Hawk-Eye / Open-Short System SATO Bar Coding Machine Bin-Cheng Technology (BCT) DTFS Equipments MICRON DT & FS Equipments Contrel PLCC Lead Scanning System STARLABS / HYLAX Laser Marker Advanced Industrial Systems (AIS) Laser Marker Technical Systems Integrators (TSI) Laser Marker SONIX Scanning Acoustic Microscopy HYLAX / STARLABS Laser Marking Equipment HANS Laser Marking Equipment RPS Solderability Testing Machine MountainGate Steam Aging Machine Shimadzu AA-6800 Atomic Absorption Spectrophotometer SEIKO XRF Plating Thickness Measuring Equipment PACKAGES HANDLED ⦁ ⦁ ⦁ ⦁ ⦁ ⦁ ⦁ ⦁ ⦁ ⦁ SOIC PDIP PLCC SSOP TSSOP TSOC MQFP MSOP QFN (8x8) VSOIC 8 SPECIAL SKILLS ⦁ COMPUTER APPLICATIONS Microsoft Windows Operating system Microsoft Office (Excel, Word, and Powerpoint) 8 ClarisWorks Sofware used for creating marking logo Macintosh Computer Software for creating Marking layout Microsoft Windows NT for Laser Marking System Statistica for Statistical Analysis Minitab Statistical Software JMP Statistical Software Can perform computer set-up and troubleshooting for both software and hardware EDUCATIONAL BACKGROUND ⦁ Bachelor of Science in Electrical Engineering MAPUA INSTITUTE OF TECHNOLOGY Muralla St., Intramuros, Manila Belongs to the Top 20 of the 1996 Graduating Class 1991 – 1996 ⦁ Secondary Education ESPIRITU SANTO PAROCHIAL SCHOOL Tayuman cor. Rizal Avenue, Sta. Cruz, Metro Manila Deportment Awardee 1987 - 1991 ⦁ Primary Education ESPIRITU SANTO PAROCHIAL SCHOOL Tayuman cor. Rizal Avenue, Sta. Cruz, Metro Manila 1981 - 1987 PERSONAL INFORMATION DATE OF BIRTH CIVIL STATUS HEIGHT WEIGHT RELIGION LANGUAGES SPOKEN NATIONALITY : June 12, 1974 : Married : 5’8” : 160 lbs : Roman Catholic : Filipino & English : Filipino 9 CHARACTER REFERENCE ⦁ RAQUEL DELA CRUZ Department Manager Quality Systems Group ON Semiconductor Governor’s Drive, Bo. Maduya Carmona, Cavite, Philippines 4116 ⦁ RAUL MARTINEZ Department Manager sCSP/PBGA/SBGA Process Engineering Amkor Technology – P3/P4 Laguna Technopark Biñan, Laguna ⦁ KENT SALANGSANG Senior Director New Product Introduction Amkor Technology – P1 Muntinlupa, Alabang Metro Manila I hereby certify that the statements, data and entries mentioned above are true and accurate. __________________ Angelo R. Uy 10