V.Jain

Alfaisal University- Collage of Engineering. ARE355, Quantity Surveying Mid Term 02. July 14. 2020. Weight 15% Specific Course Outcomes Students who successfully complete this course should be able to: CLO.1. Be able to Recognize the responsibility of an Architectural engineer in terms of building cost, life-cycle cost, and construction estimating CLO.2. Be able to Describe the appropriate application and performance of construction materials, products and components, including their economic and environmental impact and reuse. CLO.3. Be able to Prepare economic analysis and cost estimates related to design, construction, and maintenance of systems in buildings taking into account realistic economic constrains. CLO.4. Be able to Evaluate the available advanced technological solutions and factors that affect the cost of a building based upon economic, performance and sustainability criteria. CLO.5. Be able to Use common construction rates, including the constituents of material, labour, plant and profit with the accurate application of rules of measurement to complex structures. CLO.6. Be able to Operate with different proprietary computer Architectural that enables to measure different items of buildings according to the Standard Method of Measurement of Building Work. CLO.7. Be able to Prepare precise specifications and bill of quantities for a proposed building design. Mapped Program SOs SO1 Questions SO1 Q1-2 SO2 Q2 Q1-2 SO7 SO4 S06 PSYCHOMOTOR Q1-2 Please answer the following questions on the attached pages provided. Q-1.0 Your project is to analyze the new staff building construction project comprising Architectural, and structural detailed construction design drawings and to quantify the requested line items for the divisions stated Use the proper Bill of Quantity format, (BoQ), project name, division and page number. (Wt 15.0). Your answers should show the take-off Process and how the quantities or items are calculated. The use of color is also recommended. Question From these Construction drawings please study and provide the BoQ take off items for the following Divisions: Div (10) : Four line items. Div (11) : Four line items. 2 for Kit and Two for Laundry Div (12) : Four line items. Mid Term 02 July 14, 2020. ARE 355- Dr. I. Al Saudi Weight 3pts for each Div. Page 2 Alfaisal University- Collage of Engineering. ARE355, Quantity Surveying Mid Term 02. July 14. 2020. Weight 15% Refer to the water services drawings and provide the following take offs: Div (22) : Three line items for COLD water network (2 toilet and 1Washing) Three line items for HOT water network. (2 toilet and 1Washing) Weight 12 pts. Three line items for DRAINAGE water network. (1 toilet, 1 Washing, 1 Roof) Main sewer line is 1.0 M below ground slab. Div (23): Three line items Note: The 5 washing machines which require both Cold and Hot lines are occupying a 5.0 M wall length. Toilet accessories for the toilets and bathrooms: Chrome, Tower rail 400mm long. Chrome, Paper holder. Chrome, Hook. Chrome, Towel Ring 300mmDia. Glass Shelf 150x300mm Spray hose. Waste basket Mirror 900mmx900mm Equipment for Food and Beverages are shown on the drawings: Drawings Attached PH and HVAC Assume, the following info on (floor plan and Roof Plan): 1- Main water supply from roof tank is 2.0 M away from the roof Elect. Water Heater. 2- Main Cold water and Hot water Lines on the Roof run down on the roof between Grid Lines 11 and 12 and then continue horizontally along Grid Line (C). Both lines feed below (vertically) in the column on Grid (C8) to feed Toilet G04 and G05. Also, while on the roof the main lines continue on the roof to feed below (vertically) the laundry room on Column Grids (E4). Mid Term 02 July 14, 2020. ARE 355- Dr. I. Al Saudi Page 3 Alfaisal University- Collage of Engineering. ARE355, Quantity Surveying Mid Term 02. July 14. 2020. Weight 15% 3- Roof drain water discharges on the façade wall 300mm from the ground. 4- G04 Toilet. The shower is 1.0M wide and the sink is 800mm from the side wall, WC is 1400mm from the side wall. NOTE BoQ pages for the relevant divisions. Only use the applicable items. Good Luck\\\ Mid Term 02 July 14, 2020. ARE 355- Dr. I. Al Saudi Page 4