Tertius Saayman
$20/hr
Architectural 3D Specialist
- Reply rate:
- -
- Availability:
- Part-time (20 hrs/wk)
- Age:
- 33 years old
- Location:
- Port Elizabeth, Eastern Cape, South Africa
- Experience:
- 3 years
Software: AutoCAD
GENERAL NOTES:
CONTRACTORS AND SUB-CONTRACTORS
ARE TO CHECK ALL DIMENSIONS AND
LEVELS ON SITE PRIOR TO COMMENCING
WORK AND /OR ORDERING MATERIALS.
FIGURED DIMENSIONS TO BE TAKEN
PREFERENCE TO SCALING AND LARGE
SCALE DETAILS ARE TO SUPERCEDE
SMALL SCALE.
Polyclosure to seal gap
between 304x114 laminated
beam and roof sheeting,
manufactured to fit
DIMONDEK 400 profile.
152x50 SA pine Eaves rafter fixed
to with galvanised mild steel cleats
to 304x114 laminated beam.
DURBIGUM Torchon waterproofing
on screed to fall to full bore
outlets with lowest point to be
30 high on 22 marine ply on top
of 228x50 SA pine rafters at
400 centers
228x50 SA pine rafters at
400 centers to be cast into
HEMPCRETE wall and fixed
with mild steel cleats to
228x75 laminated beam.
152x50 SA pine rafters to be
fixed with galvanised mild steel
cleats at both ends to 304x114
laminated beams and supported
by a 228x75 laminated beam in
the middle.
228x75 Laminated beam
on 152x152 SA pine
square column.
DIMONDEK 400 aluminum, "ColorCote ARX" off
white roof sheeting. Fixed with self tapping
screws through 40 LAMBDABOARD to 75x50
SA pine purlins at 1050mm centers on 152x50
SA Pine rafters.
75x50 SA pine
purlins at 1050
centers.
152x50 SA pine beam fixed with a
galvanised mild steel u-bracket to
17° angled 100x100x5 thick square
tube column.
ALL FINISHES TO SPECIFICATIONS OR
OWNERS CHOICE.
Refer to
component
C01-01.
5°
750 overhang
5°
Refer to part
wall section
A01-01.
DIMONDEK 400 aluminum, "ColorCote
ARX" off white roof sheeting. Fixed
with self tapping screws through 40
LAMBDABOARD to 75x50 SA pine
purlins at 1050mm centers on 152x50
SA Pine rafters.
ANY UNCERTAINTIES IN ANY
DOCUMENTATION IS TO BE REFERRED TO
THE ARCHITECT PRIOR TO EXECUTION OF
WORK AND ORDERING OF MATERIALS.
WORK TO COMPLY WITH LOCAL AND NBR.
600 overhang
1015 overhang
Fixed glass
Fixed glass
Fixed glass
Fixed glass
Fixed glass
Fixed glass
Fixed glass
Fixed glass
Fixed glass
Fixed glass
Fixed glass
Fixed glass
Fixed glass
114x50mm SA pine timber framed
wall construction with HEMPCRETE
infill/cladding to be plastered
with lime.
Wall to be plastered
with lime.
1000 high balustrade refer to
assembly
Refer to
detail 2
A02-01.
Wall to be plastered
with lime.
2610 HEMPCRETE wall height
242 474
Fixed glass
Fixed glass
Fixed glass
Fixed glass
228x50 SA pine support beam for 228x50
SA pine floor joists on 230x230 masonry
stub column with a 230x230x50 thick SA
pine spacer between stub column and
support beam.
Void under floor
joists to be
naturally
ventilated.
Airbrick
Fixed glass
15 INTERNAL
RESTAURANT
SEATING AREA
50x50mm galvanized mild
steel square tube frame
at a 17° angle cladded
horizontally with 75x25mm
SA pine planks
242 924 u/s of
beam
242 474 u/s of
rafter
100x100mm galvanized mild
steel square tube column
at a 17° angle.
°
107
FFL 240 054
FFL 240 054
floor joists
Fixed glass
W10
16
D10
33
08 RESTAURANT KITCHEN
240 029
D3
5
W2
22
450
Fixed glass
Fixed glass
-
Refer to detail
1 A02-01.
1070 overhang
3595 SA pine square column (152x152)
242 924
240 029 Top of
floor joists
NGL
Airbrick
Airbrick
Airbrick
NGL
Refer to component drawing
C00-00 for ramp details.
r/c strip foundation to
engineers specification.
Floor tiles to be laid on 22 plywood on
228x50 SA Pine floor joists at 400
centers fixed to masonry foundation
walls with a 75x50 SA Pine ledger strip.
r/c strip foundation to
engineers specification.
6000 liters underground rainwater
tank to be placed at a depth at
maximum 2700 with a 150 layer of
gravel. Pipe connections as per
manufacturers specification.
r/c pad foundation to
engineers specification.
110x22 ECOWOOD Endurance range decking
planks fixed with ECOCLIPS to 152x50mm
SA pine floor joists at 400mm centers
fixed with 75x50 SA pine ledger strips
to foundation walls.
r/c pad foundation to
engineers specification.
L04-01 Section A-A
Scale 1:50
75x50 SA pine purlins
at 1050 centers.
152x50 SA pine rafters at
1115 centers.
242 114
114x50mm SA pine timber framed
wall construction with HEMPCRETE
infill/cladding to be plastered
with lime.
Wall to be plaster
with lime and painted
2910
2085
u/s of
lintel
DIMONDEK 400 aluminum, "ColorCote ARX" off
white roof sheeting. Fixed with self tapping
screws through 40 LAMBDABOARD to 75x50
SA pine purlins at 1050mm centers on 152x50
SA Pine rafters.
Wall to be plaster
with lime and painted
D4
7
18 FEMALE ABLUTION
17 MALE ABLUTION
FFL 240 054
FFL 240 054
830
Top of
240 029
floor joists
For continuation of
drawing, refer to
section B-B (b)
NGL
Floor tiles to be laid on 22 plywood on 228x50
SA Pine floor joists at 400 centers fixed to
masonry foundation walls with a 75x50 SA
Pine ledger strip.
r/c strip foundation to
engineers specification.
r/c strip foundation to
engineers specification.
r/c strip foundation to
engineers specification.
Void under floor joists to
be naturally ventilated.
r/c strip foundation to
engineers specification.
L04-02 Section B-B (a)
Scale 1:50
COPYRIGHT RESERVED
152x152 SA pine square
column.
Refer to part
wall section
A01-02.
40 LAMBDABOARD to 75x50 SA
pine purlins at 1050mm centers on
152x50 SA Pine rafters.
152x50 SA pine rafters at
1115 centers.
DIMONDEK 400 aluminum, "ColorCote ARX" off
white roof sheeting. Fixed with self tapping
screws through 40 LAMBDABOARD to 75x50
SA pine purlins at 1050mm centers on 152x50
SA Pine rafters.
75x50 SA pine purlins
at 1050 centers.
152x50 SA pine rafters at
1115 centers.
DATE
NO.
Fixed glass
Fixed glass
Fixed glass
Fixed glass
Fixed glass
Fixed glass
Fixed glass
Fixed glass
Fixed glass
Fixed glass
Fixed glass
W10
19
Fixed glass
Fixed glass
Fixed glass
Fixed glass
Fixed glass
W10
18
Fixed glass
Fixed glass
Fixed glass
Fixed glass
DESCRIPTION
REVISIONS
242 114 u/s of
lintel
DRAWN BY:
Wall to be plastered
with lime.
Wall to be plastered
with lime.
Dish pickup area.
228x50 SA pine support beam for 228x50
SA pine floor joists on 230x230 masonry
stub column with a 230x230x50 thick SA
pine spacer between stub column and
support beam.
230x230x50 thick SA pine
spacer between stub column
and support beam.
228x50 SA pine support beam for 228x50 SA
pine floor joists on 230x230 masonry stub column
with a 230x230x50 thick SA pine spacer between
stub column and support beam.
Void under floor joists to
be naturally ventilated.
08 RESTAURANT KITCHEN
12 OFFICE
FFL 240 054
FFL 240 054
T
E
R
T
I
U
S A A Y M AN
240 029 Top of
floor joists
830
Fixed glass
Fixed glass
W10
20
W10
21
For continuation of
drawing, refer to
section B-B (a)
Fixed glass
Wall to be plastered
with lime.
114x50mm SA pine timber framed
wall construction with HEMPCRETE
infill/cladding to be plastered
with lime.
2085
Fixed glass
2610 HEMPCRETE wall height
Refer to
detail 3
A02-01.
2910
152x50 SA pine rafters at
1115 centers.
NGL
PROJECT:
Proposed new new visitors center with
restaurant on Crossways Farm Village.
r/c pad foundation
to engineers
specification.
r/c pad foundation
to engineers
specification.
L04-03 Section B-B (b)
Scale 1:50
r/c pad foundation to
engineers specification.
r/c pad foundation to
engineers specification.
r/c strip foundation to
engineers specification.
r/c pad foundation to
engineers specification.
Floor tiles to be laid on 22 plywood on 228x50
SA Pine floor joists at 400 centers fixed to
masonry foundation walls with a 75x50 SA
Pine ledger strip.
r/c pad foundation to
engineers specification.
r/c pad foundation to
engineers specification.
r/c pad foundation to
engineers specification.
Floor tiles to be laid on 22 plywood on 228x50
SA Pine floor joists at 400 centers fixed to
masonry foundation walls with a 75x50 SA
Pine ledger strip.
r/c strip foundation to
engineers specification.
6000 liters underground rainwater tank
to be placed at a depth at maximum
2700 with a 150 layer of gravel. Pipe
connections as per manufacturers
specification.
NAME:
Tertius Saayman
STUDENT NR:
-
DRAWING:
Sections
DATE:
-
SCALE:
AS SHOWN
DRAWING NR:
L04
