Tehnical Writing sample
Motherboard
N3700T
N3050T R2.0
E11554
First Edition
May 2016
Copyright © 2016 ASUSTeK COMPUTER INC. All Rights Reserved.
No part of this manual, including the products and software described in it, may be reproduced,
transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any
means, except documentation kept by the purchaser for backup purposes, without the express written
permission of ASUSTeK COMPUTER INC. (“ASUS”).
Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless
such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the
product is defaced or missing.
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS
DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS,
LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE),
EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY
DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR
INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE,
AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO
RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS
MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.
Products and corporate names appearing in this manual may or may not be registered trademarks or
copyrights of their respective companies, and are used only for identification or explanation and to the
owners’ benefit, without intent to infringe.
Offer to Provide Source Code of Certain Software
This product contains copyrighted software that is licensed under the General Public License (“GPL”),
under the Lesser General Public License Version (“LGPL”) and/or other Free Open Source Software
Licenses. Such software in this product is distributed without any warranty to the extent permitted by the
applicable law. Copies of these licenses are included in this product.
Where the applicable license entitles you to the source code of such software and/or other additional data,
you may obtain it for a period of three years after our last shipment of the product, either
(1) for free by downloading it from http://support.asus.com/download
or
(2) for the cost of reproduction and shipment, which is dependent on the preferred carrier and the location
where you want to have it shipped to, by sending a request to:
ASUSTeK Computer Inc.
Legal Compliance Dept.
15 Li Te Rd.,
Beitou, Taipei 112
Taiwan
In your request please provide the name, model number and version, as stated in the About Box of the
product for which you wish to obtain the corresponding source code and your contact details so that we
can coordinate the terms and cost of shipment with you.
The source code will be distributed WITHOUT ANY WARRANTY and licensed under the same license as
the corresponding binary/object code.
This offer is valid to anyone in receipt of this information.
ASUSTeK is eager to duly provide complete source code as required under various Free Open Source
Software licenses. If however you encounter any problems in obtaining the full corresponding source
code we would be much obliged if you give us a notification to the email address-, stating
the product and describing the problem (please DO NOT send large attachments such as source code
archives, etc. to this email address).
ii
Contents
Safety information....................................................................................... iv
About this guide.......................................................................................... iv
Package contents........................................................................................ vi
N3700T / N3050T R2.0 specifications summary........................................ vi
Chapter 1:
Product introduction
Motherboard overview.............................................................................. 1-1
Central Processing Unit (CPU)................................................................. 1-7
System memory......................................................................................... 1-8
Chapter 2:
BIOS information
BIOS setup program.................................................................................. 2-1
EZ Mode...................................................................................................... 2-2
Advanced Mode......................................................................................... 2-3
Exit menu.................................................................................................... 2-4
Appendix
Notices........................................................................................................A-1
iii
Safety information
Electrical safety
•
To prevent electrical shock hazard, disconnect the power cable from the electrical outlet
before relocating the system.
•
When adding or removing devices to or from the system, ensure that the power cables
for the devices are unplugged before the signal cables are connected. If possible,
disconnect all power cables from the existing system before you add a device.
•
Before connecting or removing signal cables from the motherboard, ensure that all
power cables are unplugged.
•
Seek professional assistance before using an adapter or extension cord. These devices
could interrupt the grounding circuit.
•
Ensure that your power supply is set to the correct voltage in your area. If you are not
sure about the voltage of the electrical outlet you are using, contact your local power
company.
•
If the power supply is broken, do not try to fix it by yourself. Contact a qualified service
technician or your retailer.
Operation safety
•
Before installing the motherboard and adding components, carefully read all the manuals
that came with the package.
•
Before using the product, ensure all cables are correctly connected and the power
cables are not damaged. If you detect any damage, contact your dealer immediately.
•
To avoid short circuits, keep paper clips, screws, and staples away from connectors,
slots, sockets and circuitry.
•
Avoid dust, humidity, and temperature extremes. Do not place the product in any area
where it may be exposed to moisture.
•
Place the product on a stable surface.
•
If you encounter technical problems with the product, contact a qualified service
technician or your retailer.
About this guide
This user guide contains the information you need when installing and configuring the
motherboard.
How this guide is organized
This guide contains the following parts:
•
Chapter 1: Product introduction
This chapter describes the features of the motherboard and the new technology it
supports. It includes descriptions of the switches, jumpers, and connectors on the
motherboard.
•
Chapter 2: BIOS information
This chapter discusses changing system settings through the BIOS Setup menus.
Detailed descriptions for the BIOS parameters are also provided.
iv
Where to find more information
Refer to the following sources for additional information and for product and software
updates.
1.
ASUS websites
The ASUS website provides updated information on ASUS hardware and software
products. Refer to the ASUS contact information.
2.
Optional documentation
Your product package may include optional documentation, such as warranty flyers,
that may have been added by your dealer. These documents are not part of the
standard package.
Conventions used in this guide
To ensure that you perform certain tasks properly, take note of the following symbols used
throughout this manual.
DANGER/WARNING: Information to prevent injury to yourself when
completing a task.
CAUTION: Information to prevent damage to the components when
completing a task
IMPORTANT: Instructions that you MUST follow to complete a task.
NOTE: Tips and additional information to help you complete a task.
Typography
Bold text
Indicates a menu or an item to select.
Italics
Used to emphasize a word or a phrase.
Keys enclosed in the less-than and greater-than sign
means that you must press the enclosed key.
Example: means that you must press the Enter or
Return key.
+ +
If you must press two or more keys simultaneously, the key
names are linked with a plus sign (+).
v
Package contents
Check your motherboard package for the following items.
Motherboard
ASUS N3700T / N3050T R2.0 motherboard
Cables
2 x Serial ATA 6.0 Gb/s cables
1 x SATA power cable
Accessories
1 x I/O Shield
1 x Mini PCIe screw package
Thin Mini ITX I/O Shield
Documentation
User Guide
If any of the above items is damaged or missing, contact your retailer.
N3700T / N3050T R2.0 specifications summary
N3050T
R2.0
Specifications
Intel Celeron Dual-Core N3050 SoC onboard processor
®
CPU
®
√
Intel Pentium Quad-Core N3700 SoC onboard processor
®
N3700T
√
®
2 x SO-DIMM DDR3 1600/1066 MHz, maximum 8 GB, non-ECC,
un-buffered memory support both 1.35V DDR3L and 1.5V DDR3
Memory
Dual-channel memory architecture
√
√
√
√
√
√
* Refer to www.asus.com for the Memory QVL (Qualified Vendors
List).
Expansion
slots
Graphics
1 x mini PCIe (full length, with mSATA support)*
1 x mini PCIe (half length)
Integrated graphics processor - Intel® HD Graphics support
Multi-VGA output support: HDMI, D-Sub, LVDS
- Supports HDMI with maximum resolution of 3840 x 2160 @
30Hz
- Supports D-Sub with maximum resolution of 1920 x 1200 @
60Hz
- Supports LVDS with maximum resolution of 1920 x 1200 @
60Hz
Maximum shared memory of 512 MB
Intel® Celeron® Dual-Core N3050 SoC onboard Processor
- 1 x mSATA connector*
√
- 2 x SATA 6.0 Gb/s connectors
Storage
Intel® Pentium® Quad-Core N3700 SoC onboard Processor
- 1 x mSATA connector*
- 2 x SATA 6.0 Gb/s connectors
* mSATA shares the same slot with the full-length mini-PCIe card.
mSATA shares the same bandwidth with SATA6G_2 slot. When
a device is installed on the SATA6G_2 slot, the mSATA device is
disabled.
(continued on the next page)
vi
√
N3700T / N3050T R2.0 specifications summary
N3050T
R2.0
N3700T
Realtek® RTL8111H, 1 x Gigabit LAN Controller
√
√
Intel® Celeron® Dual-Core N3050 SoC onboard Processor
- 4 x USB 3.0 / 2.0 ports (4 ports at the rear panel)
√
Specifications
LAN
USB
Intel® Pentium® Quad-Core N3700 SoC onboard Processor
- 4 x USB 3.0 / 2.0 ports (4 ports at the rear panel)
GL852G USB Hub
- 5 x USB 2.0 ports (5 ports at mid-board)
Audio
Realtek® ALC887-VD2 8-channel High Definition Audio
CODEC
√
√
√
√
√
√
√
- Supports jack-detection, and front panel jack-retasking
ASUS 5X PROTECTION
- ASUS LANGuard - Advanced LAN protection
-ASUS Enhanced DRAM Overcurrent Protection - Short
circuit damage prevention
- ASUS ESD Guards - Enhanced ESD protection
-ASUS High-Quality 5K-Hour Solid Capacitors - 2.5x long
lifespan with excellent durability
- ASUS Stainless Steel Back I/O - 3x more durable
corrosion-resistant coating
ASUS Exclusive Features
- ASUS AI Charger
- ASUS AI Suite 3
- ASUS USB3.0 Boost
ASUS unique
features
ASUS Quiet Thermal Solution
- ASUS Fan Xpert
One Stop Control
AI Suite 3
Push Notice
- Monitor your PC status with smart devices in real time
Mobo Connect
Media Streamer
- Pipe music or movies from your PC to a smart TV
-Media Streamer app for portable smartphone/tablet,
supporting iOS7 and Android 4.0 system
100% All High-quality Conductive Polymer
Capacitors
(continued on the next page)
vii
N3700T / N3050T R2.0 specifications summary
Specifications
N3050T
R2.0
N3700T
√
√
√
√
√
√
1 x DC power connector*
1 x HDMI port
1 x D-Sub port
Rear panel I/O
ports
4 x USB 3.0/2.0 ports
1 x Gigabit LAN (RJ-45) port
2 x Audio jacks
* Connector Dimension: 5.5 x 2.5mm, Supports both 19V and
12V DC input.
3 x USB 2.0 connectors support additional 5 USB 2.0
ports
2 x SATA 6.0Gb/s connectors
1 x mSATA connector
1 x CPU Fan connector (4pin)
1 x Chassis Fan connector (4pin)
1 x Speaker header (4-1 pin)
1 x Front panel audio connector
1 x TPM connector (14-1 pin)
1 x LVDS connector (40pin)
1 x System Panel connector
Internal
connectors
1 x Chassis intrusion connector
1 x COM header
Connectors for AIO System
1 x 2-pin internal DC power connector
1 x SATA power connector
1 x Stereo speaker connector
1 x DMIC header
Connectors for Flat Panel Display
1 x Display panel backlight power selector
1 x Flat panel display brightness connector
1 x Display panel VCC power selector
1 x LCD panel monitor switch header
BIOS features
64 Mb Flash ROM, UEFI AMI BIOS, PnP, DMI2.0,
WfM2.0, SM BIOS 2.8, ACPI 5.0, Multi-language BIOS,
ASUS EZ Flash 3, ASUS CrashFree BIOS3, My Favorites,
Quick Note, Last Modified Log, F12 PrintScreen, F3
Shortcut functions and ASUS DRAM SPD (Serial
Presence Detect) memory information
(continued on the next page)
viii
N3700T / N3050T R2.0 specifications summary
Specifications
Manageability
WfM 2.0, DMI 2.0, WOL by PME, PXE
N3050T
R2.0
N3700T
√
√
√
√
√
√
√
√
Drivers
Support DVD
ASUS utilities
EZ Update
Anti-virus software (OEM version)
Windows® 10 (64-bit)
Windows® 8.1 (64-bit)
OS support
Windows® 7 (64-bit)
Form factor
Thin Mini-ITX Form Factor, 6.7 in x 6.7 in ( 17.0 cm x 17.0
cm )
Specifications are subject to change without notice.
ix
1
Product introduction
Motherboard overview
•
Unplug the power cord from the wall socket before touching any component.
•
Before handling components, use a grounded wrist strap or touch a safely grounded
object or a metal object, such as the power supply case, to avoid damaging them due
to static electricity.
•
Before you install or remove any component, ensure that the ATX power supply is
switched off or the power cord is detached from the power supply. Failure to do so
may cause severe damage to the motherboard, peripherals, or components.
•
Unplug the power cord before installing or removing the motherboard. Failure to do so
can cause you physical injury and damage to motherboard components.
1
2
3
4
5
6
1
7
17.0cm(6.7in)
USBE12
USBE34
BLKT_PWR_SEL
SATA_PWRCON
LCD_BLKT_PANEL
VGA
Intel®
N3050
COM2
COM4
COM3
64Mb
BIOS
LAN1
22
USB3_34
10
11
12
13
BATT_CON
WLAN
DDR3 DIMM_B1 (64bit, 240-pin module)
ALC
887VD2
DDR3 DIMM_A1 (64bit, 240-pin module)
CLRTC
21
SPK_OUT
20
TPM
CHASSIS
AAFP
VCC_PWR_SEL
Super
I/O
LINE_OUT
MIC IN
9
MSATA_MPCIE
ASM
1442K
RTL
8111H
8
PANEL_SW
SPEAKER
LVDS
CPU_FAN
23
CHA_FAN
F_PANEL
ASM
1480
USB3_12
HDMI
USBE5
17.0cm(6.7in)
DC_PWR
ATX19V
SATA6G_2 SATA6G_1
24
N3050T R2.0
14
DMIC
19 18 17
ASUS N3700T / N3050T R2.0
16
15
1-1
1
2
3
4
5
6
1
7
17.0cm(6.7in)
USBE12
USBE34
BLKT_PWR_SEL
SATA_PWRCON
9
MSATA_MPCIE
VGA
LCD_BLKT_PANEL
ASM
1442K
Intel®
N3700
COM2
COM4
COM3
64Mb
BIOS
RTL
8111H
8
PANEL_SW
SPEAKER
LVDS
CPU_FAN
23
CHA_FAN
F_PANEL
ASM
1480
USB3_12
HDMI
USBE5
-cm(6.7in)
DC_PWR
ATX19V
SATA6G_2 SATA6G_1
24
LAN1
22
USB3_34
WLAN
DDR3 DIMM_B1 (64bit, 240-pin module)
ALC
887VD2
DDR3 DIMM_A1 (64bit, 240-pin module)
CLRTC
21
SPK_OUT
AAFP
20
TPM
CHASSIS
VCC_PWR_SEL
Super
I/O
LINE_OUT
MIC IN
12
13
BATT_CON
N3700T
14
DMIC
19 18 17
16
15
Scan the QR code to get the detailed pin definitions.
CPU and chassis fan connectors (4-pin CPU_FAN, 4-pin CHA_FAN )
Connect the fan cables to the fan connectors on the motherboard, ensuring that
the black wire of each cable matches the ground pin of the connector.
Do not forget to connect the fan cables to the fan connectors. Insufficient air
flow inside the system may damage the motherboard components. These are
not jumpers! Do not place jumper caps on the fan connectors! The CPU_FAN
connector supports a CPU fan of maximum 1A (12 W) fan power.
SATA power connector (15-pin SATA_PWRCON)
This connector is for the SATA power cable. The power cable plug is designed to
fit this connector in only one orientation. Find the proper orientation and push down
firmly until the connector completely fit. To provide power to your SATA device,
connect the SATA power cable to this connector
1-2
Chapter 1: Product introduction
USB 2.0 connectors (USBE1~5)
Connect the USB module cable to these connectors, then install the module to a
slot opening at the back of the system chassis. These USB connectors comply with
USB 2.0 specifications and support up to 480Mbps connection speed.
Serial ATA 6.0Gb/s connectors (SATA6G_1/2)
These connectors connect to Serial ATA 6.0 Gb/s hard disk drives via Serial ATA
6.0 Gb/s signal cables.
When using hot-plug and NCQ, set the SATA Mode Selection item in the BIOS
to [AHCI].
LCD panel monitor switch header (2-pin PANEL_SW)
This 2-pin header is for connecting a monitor switch that can turn off the LCD panel
display backlight.
System panel connector (10-1 pin F_PANEL)
This connector supports several chassis-mounted functions.
Speaker connector (4-pin SPEAKER)
This 4-pin connector is for the chassis-mounted system warning speaker. The
speaker allows you to hear system beeps and warnings.
Display panel backlight power selector (3-pin BLKT_PWR_SEL)
2
1
2
3
BLKT_PWR_SEL
12V
(Default)
Pins
1-2 (Default)
2-3
Setting
12V
19V
19V
LVDS connector
This connector is for an LCD monitor that supports Low-voltage Differential
Signaling (LVDS) interface.
Flat panel display brightness connector (8-pin LCD_BLKT_PANEL)
This connector is for the LCD panel backlight and brightness controls. It enables
the LCD panel backlight, provides backlight control signals, and provides
brightness control signals for the brightness button on the front panel.
Intel® Pentium® Quad-core N3700 Processor
The motherboard comes with an onboard Intel® Pentium® Quad-core processor.
Intel® Celeron® Dual-core N3050 Processor
The motherboard comes with an onboard Intel® Celeron® Dual-core processor.
ASUS N3700T / N3050T R2.0
1-3
RTC Battery header (2-pin BATT_CON)
This connector is for the lithium CMOS battery.
WLAN module slot (WLAN)
Display panel VCC power selector (VCC_PWR_SEL)
VCC_PWR_SEL
3
2
1
3V
(Default)
5V
12V
Pins
1 (Default)
2
3
Setting
3V
5V
12V
DDR3 DIMM slots
Install 2 GB, 4 GB, and 8 GB unbuffered non-ECC DDR3 DIMMs into these DIMM
sockets.
TPM connector (14-1 pin TPM)
This connector supports a Trusted Platform Module (TPM) system, which can
securely store keys, digital certificates, passwords and data. A TPM system also
helps enhance network security, protects digital identities, and ensures platform
integrity.
DMIC connector (4-pin DMIC)
The DMIC connector is for connecting the digital microphone module used in All-inOne chassis.
Chassis intrusion header (4-1 pin CHASSIS)
This header is for a chassis-mounted intrusion detection sensor or switch. Connect
one end of the chassis intrusion sensor or switch cable to this header. The chassis
intrusion sensor or switch sends a high-level signal to this header when a chassis
component is removed or replaced. The signal is then generated as a chassis
intrusion event.
By default, the pin labeled “Chassis Signal” and “Ground” are shorted with a jumper
cap. Remove the jumper caps only when you intend to use the chassis intrusion
detection feature.
Front panel audio connector (10-1 pin AAFP)
This connector is for a chassis-mounted front panel audio I/O module that supports
either HD Audio or legacy AC`97 audio standard. Connect one end of the front
panel audio I/O module cable to this connector
1-4
•
We recommend that you connect a high-definition front panel audio
module to this connector to avail of the motherboard’s high-definition audio
capability.
•
If you want to connect a high-definition front panel audio module to
this connector, set the Front Panel Type item in the BIOS setup to [HD
Audio]. If you want to connect an AC’97 front panel audio module to this
connector, set the item to [AC97]. By default, this connector is set to [HD
Audio].
Chapter 1: Product introduction
Internal stereo speaker header (4-pin SPK_OUT)
The internal mono speaker header allows connection to an internal, low-power
speaker for basic system sound capability. The subsystem is capable of driving a
speaker load of 4 Ohms at 3 Watts (rms).
Clear RTC RAM (2-pin CLRTC)
This header allows you to clear the CMOS RTC RAM data of the system setup
information such as date, time, and system passwords.
To erase the RTC RAM:
Turn OFF the computer and unplug the power cord.
2.
Use a metal object such as a screwdriver to short the
two pins.
3.
Plug the power cord and turn ON the computer.
4.
Hold down the key during the boot process and
enter BIOS setup to re-enter data.
CLRTC
+3V_BAT
GND
1.
PIN 1
If the steps above do not help, remove the onboard battery and short the two
pins again to clear the CMOS RTC RAM data. After clearing the CMOS, reinstall
the battery.
Serial port connectors (10-1 pin COM2~5)
Connect the serial port module cable to one of theses connectors, then install the
module to a slot opening at the back of the system chassis.
mSATA/mPCIe combo slot (MSATA_MPCIE)
This slot allows you to install a full length mSATA or mini-PCIe card, providing you
with expandability and connectivity solutions for an optimal system performance.
•
mSATA shares the same slot with the full-length mini-PCIe card.
•
mSATA shares the same bandwidth with SATA6G_2 slot. When a device is
installed on the SATA6G_2 slot, the mSATA device is disabled.
Internal DC power connector (2-pin ATX19V/12V)
This connector is for an ATX power supply. The plug from
the power supply is designed to fit this connector in only
one orientation. Find the proper orientation and push down
firmly until the connector completely fits.
ATX19V
GND
DC_JACK_IN
PIN 1
This connector supports 12V and 19V by models. Refer to the specification
sheet of the model for details.
ASUS N3700T / N3050T R2.0
1-5
IRQ assignments for this motherboard
WLAN
A
B
C
D
E
F
G
H
shared
–
–
–
–
–
–
–
–
–
shared
–
–
–
–
–
–
shared
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
shared
–
–
–
–
Mini-PCIe
Realtek 8111H
Controller
XHCI Controller
HD Audio Controller
SATA Controller
–
shared
–
–
shared
–
When using PCI cards on shared slots, ensure that the drivers support “Share IRQ” or that
the cards do not need IRQ assignments. Otherwise, conflicts will arise between the two PCI
groups, making the system unstable and the card inoperable.
Rear panel connectors
1
1.
2.
1-6
2
3
4
5
2
6
7
DC power connector. Insert the power adapter into this port.
•
Connector Dimension: 5.5 x 2.5mm. It can support both 19V and 12V DC input.
•
The power adapter is purchased separately.
USB 3.0 ports. These 9-pin Universal Serial Bus (USB) ports are for USB 3.0 / 2.0
devices.
•
USB 3.0 devices can only be used for data storage.
•
We strongly recommend that you connect USB 3.0 devices to USB 3.0 ports for faster
and better performance from your USB 3.0 devices.
•
Due to the design of the Intel® 100 series chipset, all USB devices connected to the
USB 2.0 and USB 3.0 ports are controlled by the xHCI controller. Some legacy USB
devices must update their firmware for better compatibility.
Chapter 1: Product introduction
3.
HDMI port. This port is for a High-Definition Multimedia Interface (HDMI) connector,
and is HDCP compliant allowing playback of HD DVD, Blu-Ray, and other protected
content.
4.
Video Graphics Adapter (VGA) port. This 15-pin port is for a VGA monitor or other
VGA-compatible devices.
5.
LAN (RJ-45) port. This port allows Gigabit connection to a Local Area Network (LAN)
through a network hub.
Activity Link
LED
LAN port LED indications
Activity/Link LED
Status
Description
Off
No link
Orange
Linked
Orange
Data activity
(Blinking)
Orange
Ready to wake
(Blinking then up from S5
steady)
mode
Speed LED
Status
Description
OFF
10Mbps connection
ORANGE 100Mbps connection
GREEN
1Gbps connection
_
Speed
LED
LAN port
_
6.
Line Out port (lime). This port connects to a headphone or a speaker.
7.
Microphone port (pink). This port connects to a microphone.
Central Processing Unit (CPU)
The motherboard comes with an onboard Intel® Celeron® Dual-core processor.
Intel®
N3050
N3050T
N3050T R2.0 CPU socket Intel® N3050
ASUS N3700T / N3050T R2.0
1-7
Intel®
N3700
N3700T
N3700T CPU socket Intel® N3700
System memory
Overview
This motherboard comes with two Double Data Rate 3 (DDR3) Small Outline Dual Inline
Memory Module (SO-DIMM) sockets. The figure illustrates the location of the DDR3 DIMM
sockets:
Channel
Channel A
Channel B
DIMM_B1
DIMM_A1
1-8
Sockets
DIMM_A1
DIMM_B1
•
You may install varying memory sizes in Channel A and Channel B. The system
maps the total size of the lower-sized channel for the dual-channel configuration. Any
excess memory from the higher-sized channel is then mapped for single-channel
operation.
•
Always install the DIMMS with the same CAS Latency. For an optimum compatibility,
we recommend that you install memory modules of the same version or data code
(D/C) from the same vendor. Check with the vendor to get the correct memory
modules.
•
Always install a DIMM into the DIMM_A1 slot for the motherboard to work properly.
•
This motherboard supports 1.35V DDR3L and 1.5V DDR3 DIMMs.
•
Due to the memory address limitation on 32-bit Windows® OS, when you install 4GB
or more memory on the motherboard, the actual usable memory for the OS can be
about 3GB or less. For effective use of memory, we recommend that you do any of the
following:
-
Use a maximum of 3 GB system memory if you are using a 32-bit Windows® OS.
-
Install a 64-bit Windows® OS if you want to install 4GB or more on the
motherboard.
-
For more details, refer to the Microsoft® support site at http://support.microsoft.
com/kb/929605/en-us.
Chapter 1: Product introduction
Visit the ASUS website at www.asus.com for the latest QVL.
Installing a DIMM
To install a DIMM
3
To remove a DIMM
3
ASUS N3700T / N3050T R2.0
1-9
BIOS information
•
Scan the QR code to view the BIOS update guide.
•
Before using the ASUS CrashFree BIOS 3 utility, rename the
BIOS file in the removable device into N3700T.CAP (N3700T)
or N305T2.CAP (N3050T R2.0).
2
BIOS setup program
Use the BIOS Setup program to update the BIOS or configure its parameters. The BIOS
screens include navigation keys and brief online help to guide you in using the BIOS Setup
program.
Entering BIOS Setup at startup
To enter BIOS Setup at startup:
Press or during the Power-On Self Test (POST). If you do not press
or , POST continues with its routines.
Entering BIOS Setup after POST
To enter BIOS Setup after POST:
•
Press ++ simultaneously.
•
Press the reset button on the system chassis.
•
Press the power button to turn the system off then back on. Do this option only if you
failed to enter BIOS Setup using the first two options.
Using the power button, reset button, or the ++ keys to force reset from a
running operating system can cause damage to your data or system. We recommend you
always shut down the system properly from the operating system.
•
The BIOS setup screens shown in this section are for reference purposes only, and
may not exactly match what you see on your screen.
•
Visit the ASUS website at www.asus.com to download the latest BIOS file for this
motherboard.
•
If the system becomes unstable after changing any BIOS setting, load the default
settings to ensure system compatibility and stability. Select the Load Optimized
Defaults item under the Exit menu or press hotkey F5.
•
If the system fails to boot after changing any BIOS setting, try to clear the CMOS and
reset the motherboard to the default value. See section Motherboard overview for
information on how to erase the RTC RAM.
BIOS menu screen
The BIOS setup program can be used under two modes: EZ Mode and Advanced Mode.
Press to change between the two modes.
ASUS N3700T / N3050T R2.0
2-1
EZ Mode
By default, the EZ Mode screen appears when you enter the BIOS setup program. The EZ
Mode provides you an overview of the basic system information, and allows you to select the
display language, system performance mode, fan profile and boot device priority. To access
the Advanced Mode, click Advanced Mode(F7) or press .
The default screen for entering the BIOS setup program can be changed. Refer to the
Setup Mode item in Boot menu for details.
Displays the CPU/motherboard
temperature, CPU voltage output,
CPU/chassis fan speed, and SATA
information
Selects the display
language of the BIOS
setup program
Loads optimized
default settings
Displays the system properties of
the selected mode. Click to
switch EZ System Tuning modes
Displays the
Shows the
Advanced mode
bootable
menus
devices
Saves the changes
and resets the Selects the boot
system device priority
The boot device options vary depending on the devices you installed to the system.
2-2
Chapter 2: Getting started
Advanced Mode
The Advanced Mode provides advanced options for experienced end-users to configure the
BIOS settings. The figure below shows an example of the Advanced Mode. Refer to the
following sections for the detailed configurations.
To access the EZ Mode, click EzMode(F7) or press .
Quick Note
MyFavorite
Language
Menu bar
Sub-menu item
Hot Keys
General help
Menu items
Popup window
Scroll bar
Configuration fields Last modified
settings
Goes back to EZ
Mode
Displays the CPU/motherboard
temperature, CPU and memory
voltage output
ASUS N3700T / N3050T R2.0
2-3
Search on FAQ
Move your mouse over this button to show a QR code. Scan this QR code with your mobile
device to connect to the ASUS BIOS FAQ web page. You can also scan the QR code below.
Exit menu
The Exit menu items allow you to load the optimal default values for the BIOS items, and
save or discard your changes to the BIOS items.
Restore Defaults
This option allows you restore or load the default values for all the setup options. When you
select this option and press , a confirmation window appears. Select Yes to apply
the default values or press to exit.
Save Changes & Reset
Once you are finished making your selections, choose this option from the Exit menu to
ensure the values you selected are saved. When you select this option or if you press ,
a confirmation window appears. Select OK to save changes and exit.
Discard Changes and Exit
This option allows you to exit the Setup program without saving your changes. When you
select this option or if you press , a confirmation window appears. Select OK to discard
changes and exit.
Launch EFI Shell from USB drives
This option allows you to attempt to launch the EFI Shell application (shellx64.efi) from one of
the available USB devices.
2-4
Chapter 2: Getting started
Appendices
Appendix
Notices
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
•
This device may not cause harmful interference.
•
This device must accept any interference received including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with manufacturer’s instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment to an outlet on a circuit different from that to which the receiver is
connected.
•
Consult the dealer or an experienced radio/TV technician for help.
The use of shielded cables for connection of the monitor to the graphics card is required
to assure compliance with FCC regulations. Changes or modifications to this unit not
expressly approved by the party responsible for compliance could void the user’s authority
to operate this equipment.
A-1
ASUS N3700T / N3050T R2.0
IC: Canadian Compliance Statement
Complies with the Canadian ICES-003 Class B specifications. This device complies with RSS
210 of Industry Canada. This Class B device meets all the requirements of the Canadian
interference-causing equipment regulations.
This device complies with Industry Canada license exempt RSS standard(s). Operation is
subject to the following two conditions: (1) this device may not cause interference, and (2)
this device must accept any interference, including interference that may cause undesired
operation of the device.
Cut appareil numérique de la Classe B est conforme à la norme NMB-003 du Canada.
Cet appareil numérique de la Classe B respecte toutes les exigences du Règlement sur le
matériel brouilleur du Canada.
Cet appareil est conforme aux normes CNR exemptes de licence d’Industrie Canada. Le
fonctionnement est soumis aux deux conditions suivantes :
(1) cet appareil ne doit pas provoquer d’interférences et
(2) cet appareil doit accepter toute interférence, y compris celles susceptibles de provoquer
un fonctionnement non souhaité de l’appareil.
Canadian Department of Communications Statement
This digital apparatus does not exceed the Class B limits for radio noise emissions from
digital apparatus set out in the Radio Interference Regulations of the Canadian Department
of Communications.
This class B digital apparatus complies with Canadian ICES-003.
VCCI: Japan Compliance Statement
Class B ITE
KC: Korea Warning Statement
A-2
Appendices
REACH
Complying with the REACH (Registration, Evaluation, Authorisation, and Restriction of
Chemicals) regulatory framework, we published the chemical substances in our products at
ASUS REACH website at http://csr.asus.com/english/REACH.htm.
DO NOT throw the motherboard in municipal waste. This product has been designed to
enable proper reuse of parts and recycling. This symbol of the crossed out wheeled bin
indicates that the product (electrical and electronic equipment) should not be placed in
municipal waste. Check local regulations for disposal of electronic products.
DO NOT throw the mercury-containing button cell battery in municipal waste. This symbol
of the crossed out wheeled bin indicates that the battery should not be placed in municipal
waste.
ASUS Recycling/Takeback Services
ASUS recycling and takeback programs come from our commitment to the highest standards
for protecting our environment. We believe in providing solutions for you to be able to
responsibly recycle our products, batteries, other components as well as the packaging
materials. Please go to http://csr.asus.com/english/Takeback.htm for detailed recycling
information in different regions.
Regional notice for California
WARNING! This product may contain chemicals known to the State of California to cause
cancer, birth defects or other reproductive harm. Wash hands after handling.
Google™ License Terms
Copyright© 2016 Google Inc. All Rights Reserved.
Licensed under the Apache License, Version 2.0 (the “License”); you may not use this file
except in compliance with the License. You may obtain a copy of the License at:
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the
License is distributed on an “AS IS” BASIS, WITHOUT WARRANTIES OR CONDITIONS OF
ANY KIND, either express or implied.
See the License for the specific language governing permissions and limitations under the
License.
A-3
ASUS N3700T / N3050T R2.0
English ASUSTeK Computer Inc. hereby declares that this device is in
compliance with the essential requirements and other relevant provisions of
related Directives. Full text of EU declaration of conformity available at:
www.asus.com/support
Français AsusTek Computer Inc. déclare par la présente que cet appareil est
conforme aux critères essentiels et autres clauses pertinentes des directives
concernées. La déclaration de conformité de l’UE peut être téléchargée à
partir du site Internet suivant : www.asus.com/support.
Deutsch ASUSTeK Computer Inc. erklärt hiermit, dass dieses Gerät mit
den wesentlichen Anforderungen und anderen relevanten Bestimmungen
der zugehörigen Richtlinien übereinstimmt. Der gesamte Text der EUKonformitätserklärung ist verfügbar unter: www.asus.com/support
Italiano ASUSTeK Computer Inc. con la presente dichiara che questo
dispositivo è conforme ai requisiti essenziali e alle altre disposizioni pertinenti
con le direttive correlate. Il testo completo della dichiarazione di conformità
UE è disponibile all’indirizzo: www.asus.com/support
Русский Компания ASUS заявляет, что это устройство соответствует
основным требованиям и другим соответствующим условиям
соответствующих директив. Подробную информацию, пожалуйста,
смотрите на www.asus.com/support
Български С настоящото ASUSTeK Computer Inc. декларира, че това
устройство е в съответствие със съществените изисквания и другите
приложими постановления на свързаните директиви. Пълният текст на
декларацията за съответствие на ЕС е достъпна на адрес:
www.asus.com/support
Hrvatski ASUSTeK Computer Inc. ovim izjavljuje da je ovaj uređaj sukladan
s bitnim zahtjevima i ostalim odgovarajućim odredbama vezanih direktiva.
Cijeli tekst EU izjave o sukladnosti dostupan je na: www.asus.com/support
Čeština Společnost ASUSTeK Computer Inc. tímto prohlašuje, že toto
zařízení splňuje základní požadavky a další příslušná ustanovení souvisejících
směrnic. Plné znění prohlášení o shodě EU je k dispozici na adrese:
www.asus.com/support
Dansk ASUSTeK Computer Inc. erklærer hermed, at denne enhed er i
overensstemmelse med hovedkravene og andre relevante bestemmelser i de
relaterede direktiver. Hele EU-overensstemmelseserklæringen kan findes på:
www.asus.com/support
Nederlands ASUSTeK Computer Inc. verklaart hierbij dat dit apparaat
voldoet aan de essentiële vereisten en andere relevante bepalingen van
de verwante richtlijnen. De volledige tekst van de EU-verklaring van
conformiteit is beschikbaar op: www.asus.com/support
Eesti Käesolevaga kinnitab ASUSTeK Computer Inc, et see seade vastab
asjakohaste direktiivide oluliste nõuetele ja teistele asjassepuutuvatele
sätetele. EL vastavusdeklaratsiooni täielik tekst on saadaval järgmisel
aadressil: www.asus.com/support
Suomi ASUSTeK Computer Inc. ilmoittaa täten, että tämä laite on
asiaankuuluvien direktiivien olennaisten vaatimusten ja muiden tätä
koskevien säädösten mukainen. EU-yhdenmukaisuusilmoituksen koko teksti
on luettavissa osoitteessa: www.asus.com/support
Ελληνικά Με το παρόν, η AsusTek Computer Inc. δηλώνει ότι αυτή η
συσκευή συμμορφώνεται με τις θεμελιώδεις απαιτήσεις και άλλες σχετικές
διατάξεις των Οδηγιών της ΕΕ. Το πλήρες κείμενο της δήλωσης συμβατότητας
είναι διαθέσιμο στη διεύθυνση: www.asus.com/support
Magyar Az ASUSTeK Computer Inc. ezennel kijelenti, hogy ez az eszköz
megfelel a kapcsolódó Irányelvek lényeges követelményeinek és egyéb
vonatkozó rendelkezéseinek. Az EU megfelelőségi nyilatkozat teljes szövege
innen letölthető: www.asus.com/support
Latviski ASUSTeK Computer Inc. ar šo paziņo, ka šī ierīce atbilst saistīto
Direktīvu būtiskajām prasībām un citiem citiem saistošajiem nosacījumiem.
Pilns ES atbilstības paziņojuma teksts pieejams šeit: www.asus.com/support
Lietuvių „ASUSTeK Computer Inc.“ šiuo tvirtina, kad šis įrenginys atitinka
pagrindinius reikalavimus ir kitas svarbias susijusių direktyvų nuostatas. Visą
ES atitikties deklaracijos tekstą galima rasti: www.asus.com/support
Norsk ASUSTeK Computer Inc. erklærer herved at denne enheten er i
samsvar med hovedsaklige krav og andre relevante forskrifter i relaterte
direktiver. Fullstendig tekst for EU-samsvarserklæringen finnes på:
www.asus.com/support
Polski Firma ASUSTeK Computer Inc. niniejszym oświadcza, że
urządzenie to jest zgodne z zasadniczymi wymogami i innymi właściwymi
postanowieniami powiązanych dyrektyw. Pełny tekst deklaracji zgodności UE
jest dostępny pod adresem: www.asus.com/support
Português A ASUSTeK Computer Inc. declara que este dispositivo está em
conformidade com os requisitos essenciais e outras disposições relevantes
das Diretivas relacionadas. Texto integral da declaração da UE disponível em:
www.asus.com/support
A-4
Română ASUSTeK Computer Inc. declară că acest dispozitiv se conformează
cerinţelor esenţiale şi altor prevederi relevante ale directivelor conexe. Textul
complet al declaraţiei de conformitate a Uniunii Europene se găseşte la:
www.asus.com/support
Srpski ASUSTeK Computer Inc. ovim izjavljuje da je ovaj uređaj u saglasnosti
sa osnovnim zahtevima i drugim relevantnim odredbama povezanih
Direktiva. Pun tekst EU deklaracije o usaglašenosti je dostupan da adresi:
www.asus.com/support
Slovensky Spoločnosť ASUSTeK Computer Inc. týmto vyhlasuje, že toto
zariadenie vyhovuje základným požiadavkám a ostatým príslušným
ustanoveniam príslušných smerníc. Celý text vyhlásenia o zhode pre štáty EÚ
je dostupný na adrese: www.asus.com/support
Slovenščina ASUSTeK Computer Inc. izjavlja, da je ta naprava skladna z
bistvenimi zahtevami in drugimi ustreznimi določbami povezanih direktiv.
Celotno besedilo EU-izjave o skladnosti je na voljo na spletnem mestu:
www.asus.com/support
Español Por la presente, ASUSTeK Computer Inc. declara que este dispositivo
cumple los requisitos básicos y otras disposiciones pertinentes de las
directivas relacionadas. El texto completo de la declaración de la UE de
conformidad está disponible en: www.asus.com/support
Svenska ASUSTeK Computer Inc. förklarar härmed att denna
enhet överensstämmer med de grundläggande kraven och andra
relevanta föreskrifter i relaterade direktiv. Fulltext av EU-försäkran om
överensstämmelse finns på: www.asus.com/support
Українська ASUSTeK Computer Inc. заявляє, що цей пристрій відповідає
основним вимогам та іншим відповідним положенням відповідних
Директив. Повний текст декларації відповідності стандартам ЄС
доступний на: www.asus.com/support
Türkçe AsusTek Computer Inc., bu aygıtın temel gereksinimlerle ve ilişkili
Yönergelerin diğer ilgili koşullarıyla uyumlu olduğunu beyan eder. AB
uygunluk bildiriminin tam metni şu adreste bulunabilir:
www.asus.com/support
Bosanski ASUSTeK Computer Inc. ovim izjavljuje da je ovaj uređaj usklađen
sa bitnim zahtjevima i ostalim odgovarajućim odredbama vezanih direktiva.
Cijeli tekst EU izjave o usklađenosti dostupan je na: www.asus.com/support
Appendices
ASUS contact information
ASUSTeK COMPUTER INC.
Address
Telephone
Fax
Web site
Technical Support
Telephone
Fax
Online support
4F, No. 150, Li-Te Road, Peitou, Taipei 112, Taiwan
-
-
www.asus.com
-
-, ext. 9101#
http://qr.asus.com/techserv
ASUS COMPUTER INTERNATIONAL (America)
Address
800 Corporate Way, Fremont, CA 94539, USA
Telephone-
Fax
-
Web site
http://www.asus.com/us/
Technical Support
Support fax
Telephone
Online support
-
-
http://qr.asus.com/techserv
ASUS COMPUTER GmbH (Germany and Austria)
Address
Fax
Web site
Online contact
Harkort Str. 21-23, 40880 Ratingen, Germany
-
http://www.asus.com/de
http://eu-rma.asus.com/sales
Technical Support
Telephone-
Support Fax
-
Online support
http://qr.asus.com/techserv
A-5
ASUS N3700T / N3050T R2.0
A-6
Appendices
-/-
800 Corporate Way, Fremont, CA 94539.
Asus Computer International
Date :
Signature :
Representative Person’s Name :
Apr. 3, 2016
Steve Chang / President
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.
Supplementary Information:
FCC Part 15, Subpart B, Unintentional Radiators
Conforms to the following specifications:
Model Number : N3700T
Product Name : Motherboard
hereby declares that the product
Phone/Fax No:
Address:
Responsible Party Name:
Per FCC Part 2 Section 2. 1077(a)
DECLARATION OF CONFORMITY
Ver. 140331
-/-
800 Corporate Way, Fremont, CA 94539.
Asus Computer International
Date :
Signature :
Representative Person’s Name :
May 8, 2016
Steve Chang / President
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.
Supplementary Information:
FCC Part 15, Subpart B, Unintentional Radiators
Model Number : N3050T R2.0
Conforms to the following specifications:
Product Name : Motherboard
hereby declares that the product
Phone/Fax No:
Address:
Responsible Party Name:
Per FCC Part 2 Section 2. 1077(a)
DECLARATION OF CONFORMITY
Ver. 140331